Taking Out Of Operation - Kranzle round cleaner Technical Data Manual

Taking out of operation

Taking out of operation
1. Switch off the high pressure cleaner
2. Cut off the water supply
3. Open the trigger gun with safety catch briefly
until the pressure is released
4. Apply safety catch on the trigger gun
5. Remove Kränzle Round Cleaner
6. Check if the rotor is tangled with threads etc.
7. Use a paper clip to check if the nozzles are clogged
(siehe kleine Reparaturen selbstgemacht)
Cleaning and care
Put the Round Cleaner on to the floor in such a way that the splash protection
brush cannot be deformed due to rough ground.
16