UNI-T UT90A Operating Manual page 21

Model UT90A: OPERATING MANUAL
Warning
Before remove the case bottom, make sure
the power is off, remove the test leads from
terminals and test circuit.
l
Periodically wipe the case with a damp
cloth and a little mild detergent. Do not use
chemical abrasives or solvents.
l
Please stop any operation of the Meter and
sent it outside to repair or service if there is
anything wrong.
l
Do not attempt to repair of service your
Meter unless you are qualified to do so and
have the relevant calibration, performance
test, and service information.
** END **
This operating manual is subject to change without
notice.
? Copyright 2001 Uni-Trend International Limited.
C
All rights reserved.
Manufacturer:
Uni-Trend International Limited
Rm901, 9/F, Nanyang Plaza
57 Hung To Road
Kwun Tong
Kowloon, Hong Kong
Tel: (852) 2950 9168
Fax: (852) 2950 9303
Email: info@uni-trend.com
http://www.uni-trend.com
21