Advertisement
Table of Contents
Pulsa Operator Guide
Safety instructions
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Wear ear defenders.
Wear ear defenders.
Wear ear defenders.
Always assume that the tool is loaded.
Wear ear defenders.
Wear ear defenders.
Wear safety glasses.
Wear safety glasses.
Wear safety glasses.
Never transport the tool with your finger on the trigger.
Wear safety glasses.
Wear safety glasses.
Only use the tool for its intended use.
Only use the tool for its intended use.
Never place your hand over the nosepiece.
Only use the tool for its intended use.
Only use the tool for its intended use.
Only use the tool for its intended use.
When servicing, remove the fuel cell, battery and nails from the magazine.
This is not a toy. Never point it at people.
This is not a toy. Never point it at people.
This is not a toy. Never point it at people.
Warning: the contents of the fuel cell are flammable.
This is not a toy. Never point it at people.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Always assume that the tool is loaded.
Always assume that the tool is loaded.
The fuel cell is under pressure. Protect it from temperatures above 50°C
Always assume that the tool is loaded.
Always assume that the tool is loaded.
(sunlight).
Never transport the tool with your finger on the trigger.
Never transport the tool with your finger on the trigger.
Never transport the tool with your finger on the trigger.
Never transport the tool with your finger on the trigger.
Do not open, puncture or burn the fuel cell.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
Never place your hand over the nosepiece.
Never place your hand over the nosepiece.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
Never place your hand over the nosepiece.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
When servicing, remove the fuel cell, battery and nails from the magazine.
When servicing, remove the fuel cell, battery and nails from the magazine.
or incandescent objects.
When servicing, remove the fuel cell, battery and nails from the magazine.
When servicing, remove the fuel cell, battery and nails from the magazine.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Warning: the contents of the fuel cell are flammable.
Warning: the contents of the fuel cell are flammable.
Warning: the contents of the fuel cell are flammable.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Warning: the contents of the fuel cell are flammable.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
The fuel cell is under pressure. Protect it from temperatures above 50°C
The fuel cell is under pressure. Protect it from temperatures above 50°C
Keep tool, fuel cells and battery away from children.
The fuel cell is under pressure. Protect it from temperatures above 50°C
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
(sunlight).
(sunlight).
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
(sunlight).
(sunlight).
place.
Do not open, puncture or burn the fuel cell.
Do not open, puncture or burn the fuel cell.
Do not open, puncture or burn the fuel cell.
For reasons of safety and operation, it is imperative that only SPIT-compatible
Do not open, puncture or burn the fuel cell.
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
Fuel Cells and nails be used. SPIT does not license any other company to
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
manufacture fuel cells and nails and can only guarantee the quality and
or incandescent objects.
or incandescent objects.
or incandescent objects.
performance of its own, genuine products. SPIT cannot accept responsibility for
or incandescent objects.
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
damage or injury caused by the use of third party fuel cells and nails which are
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
not SPIT-compatible. In particular, your product warranty will not cover damage
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
to the Pulsa 700 caused by non-compatible parts.
Keep tool, fuel cells and battery away from children.
Keep tool, fuel cells and battery away from children.
Keep tool, fuel cells and battery away from children.
Do not use the PULSA 700 in rainy or excessively humid conditions.
Keep tool, fuel cells and battery away from children.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
place.
place.
The European Standard EN 792-13 has established certain safety requirements
place.
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
For reasons of safety and operation, it is imperative that only SPIT-compatible
For reasons of safety and operation, it is imperative that only SPIT-compatible
for hand-help non-electric fastener driving tools and it requires the respective
For reasons of safety and operation, it is imperative that only SPIT-compatible
For reasons of safety and operation, it is imperative that only SPIT-compatible
instructions to be part of the tool operating manual. In your own interest, we urge
fuel cells and nails be used. SPIT does not license any other company to
fuel cells and nails be used. SPIT does not license any other company to
fuel cells and nails be used. SPIT does not license any other company to
you to follow such safety requirements without exception.
fuel cells and nails be used. SPIT does not license any other company to
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
manufacture fuel cells and nails and can only guarantee the quality and
manufacture fuel cells and nails and can only guarantee the quality and
SPIT Fastener driving tools operated by internal combustion shall only be used
manufacture fuel cells and nails and can only guarantee the quality and
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
performance of its own, genuine products. SPIT cannot accept responsibility for
performance of its own, genuine products. SPIT cannot accept responsibility for
with dispensers for combustible gas which are listed in the SPIT operating
performance of its own, genuine products. SPIT cannot accept responsibility for
performance of its own, genuine products. SPIT cannot accept responsibility for
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
damage or injury caused by the use of third party fuel cells and nails which are
damage or injury caused by the use of third party fuel cells and nails which are
damage or injury caused by the use of third party fuel cells and nails which are
specified Pulsa Fuel Cells.
damage or injury caused by the use of third party fuel cells and nails which are
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible. In particular, your product warranty will not cover damage
not SPIT-compatible. In particular, your product warranty will not cover damage
not SPIT-compatible. In particular, your product warranty will not cover damage
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
not SPIT-compatible. In particular, your product warranty will not cover damage
not SPIT-compatible. In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
to the Pulsa 700 caused by non-compatible parts.
to the Pulsa 700 caused by non-compatible parts.
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
to the Pulsa 700 caused by non-compatible parts.
to the Pulsa 700 caused by non-compatible parts.
in the operating instruction must be seen as one unit system in terms of safety.
Do not use the PULSA 700 in rainy or excessively humid conditions.
Do not use the PULSA 700 in rainy or excessively humid conditions.
Do not use the PULSA 700 in rainy or excessively humid conditions.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
Do not use the PULSA 700 in rainy or excessively humid conditions.
Do not use the PULSA 700 in rainy or excessively humid conditions.
may be used (Item 7.2.1b).
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
For the maintenance of SPIT fastener driving tools, only spare parts specified by
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
The European Standard EN 792-13 has established certain safety requirements
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
The European Standard EN 792-13 has established certain safety requirements
The European Standard EN 792-13 has established certain safety requirements
The European Standard EN 792-13 has established certain safety requirements
for hand-help non-electric fastener driving tools and it requires the respective
for hand-help non-electric fastener driving tools and it requires the respective
for hand-help non-electric fastener driving tools and it requires the respective
for hand-help non-electric fastener driving tools and it requires the respective
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
instructions to be part of the tool operating manual. In your own interest, we urge
instructions to be part of the tool operating manual. In your own interest, we urge
instructions to be part of the tool operating manual. In your own interest, we urge
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
you to follow such safety requirements without exception.
you to follow such safety requirements without exception.
you to follow such safety requirements without exception.
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
SPIT Fastener driving tools operated by internal combustion shall only be used
SPIT Fastener driving tools operated by internal combustion shall only be used
SPIT Fastener driving tools operated by internal combustion shall only be used
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
with dispensers for combustible gas which are listed in the SPIT operating
with dispensers for combustible gas which are listed in the SPIT operating
with dispensers for combustible gas which are listed in the SPIT operating
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
specified Pulsa Fuel Cells.
specified Pulsa Fuel Cells.
specified Pulsa Fuel Cells.
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
in the operating instruction must be seen as one unit system in terms of safety.
in the operating instruction must be seen as one unit system in terms of safety.
in the operating instruction must be seen as one unit system in terms of safety.
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
may be used (Item 7.2.1b).
may be used (Item 7.2.1b).
may be used (Item 7.2.1b).
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
For the maintenance of SPIT fastener driving tools, only spare parts specified by
For the maintenance of SPIT fastener driving tools, only spare parts specified by
For the maintenance of SPIT fastener driving tools, only spare parts specified by
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
Technical Helpline UK: 0800 731 4924
Technical Helpline ROI: 1 800 882 388
Safety instructions
Safety instructions
Safety instructions
Safety instructions
Safety instructions
Safety instructions
Not following the safety precautions may cause
Not following the safety precautions may cause
Not following the safety precautions may cause
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
Not following the safety precautions may cause
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
injury to yourself or others. Strictly follow the
injury to yourself or others. Strictly follow the
safety precautions.
injury to yourself or others. Strictly follow the
injury to yourself or others. Strictly follow the
safety precautions.
safety precautions.
safety precautions.
safety precautions.
safety precautions.
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible. In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
Do not use the PULSA 700 in rainy or excessively humid conditions.
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
safety precautions.
GB
GB
GB
GB
Tsupport@itwcp.co.uk
www.itwcp.co.uk
01
G
GB
GB
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SPIT Pulsa 700E
Summary of Contents for SPIT Pulsa 700E
- Page 1 SPIT-compatible. In particular, your product warranty will not cover damage not SPIT-compatible. In particular, your product warranty will not cover damage Only those fasteners listed in the SPIT operating instruction may be used in the SPIT not SPIT-compatible. In particular, your product warranty will not cover damage not SPIT-compatible.
- Page 2 When the fuel cell is empty, a small amount of propellant remains in the external chamber. For reasons of safety and operation of the unit, it is imperative that only genuine SPIT fuel cells and nails be used. SPIT nails...
- Page 3 Batteries are supplied uncharged. Fully charge them before Batteries are supplied uncharged. Fully charge them before using them for the first time. Only use SPIT batteries and using them for the first time. Only use SPIT batteries and battery chargers.
- Page 4 Lift up the cover on the fuel cell slot. Insert the fuel cell and close the cover. Cover SPIT nails Pull the button (12) back. Insert the nail strips into the back of the magazine. Release the button (12), Warning...
- Page 5 Pulsa Operator Guide The PULSA 700 can be used in all positions: The PULSA 700 can be used in all positions: Wall Floor Ceiling Wall Floor Ceiling Carefully read the safety precautions on page 11 Suitable base materials: Carefully read the safety precautions on page 11 Suitable base materials: before use.
- Page 6 Pulsa Operator Guide Use (cont.) Use (cont.) Using the PULSA 700E or 700P without the nail magazine. Using the PULSA 700E or 700P without the nail magazine. The nail magazine has to be removed for certain fastening The nail magazine has to be removed for certain fastening operations.
- Page 7 Pulsa Operator Guide Adjusting the nail insertion depth Adjusting the nail insertion depth Adjusting the nail insertion depth The tool automatically adjusts its power to suit the base material. The tool automatically adjusts its power to suit the base material. The tool automatically adjusts its power to suit the base material.
-
Page 8: Troubleshooting
Pulsa Operator Guide Servicing / Troubleshooting Servicing For operations not included in this manual, consult the SPIT After-Sales Service. Servicing that can be performed by the user: • Cleaning of filters • Inspection of fuel cell • Inspection of battery charger contacts Cleaning of filters: •...
Need help?
Do you have a question about the Pulsa 700E and is the answer not in the manual?
Questions and answers