How To Handle A Disc; Installation; How To Hold The Disc; When There Are Stains On The Surface Of The Disc - BOA 85702 Instruction Manual

28

How to handle a disc

How to hold the disc

Do not touch the unlabeled side of the disc!

When there are stains on the surface of the disc

E
Wipe gently with a wet cloth and then with a dry one. When a disc is brought in from a cold environment to a hot
N
one, condensation can form on the face of the disc. Wipe down with a soft, smooth, dry cloth before using.
G
L

Attention:

I
1. Do not write on the unlabeled side of the disc.
S
2. Do not use chemical solutions to clean the disc.
H
3. Do not stick labels or glue-based notes on the disc.
4. Do not use discs with glue residue or damaged labels.
5. Do not use anti-scratching materials or covers, which were not designed for discs.
6. Do not put or store the disc in the following environments: directly sunlight, in moist or dusty environments
or besides heating elements.

Installation

Choose the installation location carefully so that the unit will not interfere with driving operations. Avoid installing
the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as in direct sunlight or near
heater ducts.
Use only the supplied mounting hardware for a safe and secure installation.

Installation material

Installation
1.
box
Install against theft
3. Install the screw to the back
of the unit.
Copyright © by BOA
2. Install the support
bar to the fire wall
4. Then put it to the against theft
box
®
Warenhandels-GmbH ● Germany
Rev 1, Stand: 10 / 2007