Advertisement
Quick Links
INSTRUCTION
MANUAL
MODEL NUMBER: NJD-C-06
WARNING: To reduce risk of injury, the user must read and understand this
instruction manual before using the Vibrapower Belt. This machine is intended for
home use only in accordance with the instructions provided in this manual.
Please read these instructions carefully and retain for future use.
Ideal Sourcing Ltd, Ideal Home House, Newark Road, Peterborough PE1 5WG
Advertisement
Summary of Contents for Vibrapower NJD-C-06
- Page 1 MODEL NUMBER: NJD-C-06 WARNING: To reduce risk of injury, the user must read and understand this instruction manual before using the Vibrapower Belt. This machine is intended for home use only in accordance with the instructions provided in this manual.
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS CONgRATULATIONS ON ThE pURChASE Of yOUR VIBRApOwER™ BELT. pLEASE STUDy ThESE INSTRUCTIONS CAREfULLy BEfORE USE pAyINg SpECIAL ATTENTION TO ThE fOLLOwINg gUIDELINES. For your safety and the safety of others the following safeguards are very important. Failure to read and follow these instructions may lead to serious injury. - Page 3 In order to maximise the benefits of injuries Vibrapower Belt you should always you are strongly recommended to remember the following points: consult your doctor before using the In order to achieve the desired results, you Vibrapower Belt if you have any of the should use Vibrapower Belt continuously. following: Longer-term use will ensure you maintain • Heart condition or cardiovascular disease your desired goals. • High blood pressure...
- Page 4 UNPACKING THE VIBRAPOWER • To avoid danger of suffocation, please keep all plastic bags out of the reach of children. • Check that there is no damage to the unit prior to use. In case of visible damage before or during use, unplug the Vibrapower™ Belt and contact your Vendor. Do not attempt to use the Vibrapower Belt. • Please retain all packaging and paperwork for future use and store safely away from children and animals. whAT yOU wILL fIND IN ThE BOX • Vibrapower Belt unit • Remote control (attached to the belt) • Power Cord • Storage Bag • Extension Belt...
- Page 5 SETTINGS & USE At the end of your workout, turn off Remove Vibrapower Belt from packaging and the machine by unplugging from the carry case. Undo the belt by pulling apart the mains supply. hook & loop strap. Wrap the Vibrapower Belt around the part of your body you wish to exercise and secure in place using the hook & loop strap attached. The Vibrapower Belt can be used on a variety of areas of the body from stomach, back, arms, legs & buttocks. Turn the machine on by ensuring the supplied power cord is plugged in to the machine first, then once plugged in to a suitable power socket press the “On/Off ” button on the remote control. This will automatically start the machine after a couple of seconds in Program 1 at the lowest strength for the shortest time. To change between programs press the Program “p” button until you reach your desired program. Once will change it to p2,...
-
Page 6: Storage And Cleaning
STORAGE, CLEANING & TROUBLESHOOTING EXTENDINg ThE SIzE Of ThE VIBRApOwER BELT To extend the size of the Vibrapower Belt, there is an extra length of belt provided. This has hook and loop tape stitched on to it to secure in place. Slide the extension belt through the metal loop so that the hook section (shorter section) is first, double this over so that it attaches to the loop section (longer section) of the extension belt. Leave enough of the extension belt hanging so that it can connect to the belt. Then attach so that the belt fits nicely around the desired area of your body. Do not leave it so it is loose as the belt will not have the desired effect. STORAgE & CLEANINg • Clean the Vibrapower Belt with a damp cloth and mild detergent only, immediately after use. Use a weak solution of anti-bacterial washing up liquid in warm water and a microfibre cloth to clean your Vibrapower Belt, be sure to wring out the cloth so that it is just damp. • Ensure the Vibrapower Belt is unplugged from the mains before cleaning is undertaken. • Regularly check the cord/cable for damage before storing. Should the cord/cable be damaged in any way it must ONLY be replaced by the manufacturer or a similar qualified person in order to avoid a hazard. • Regularly check the Vibrapower Belt but do not switch on if it appears to be damaged or operating incorrectly. Do NOT attempt to carry out any repair to the Vibrapower Belt in any way as this must in all cases be referred to a suitably qualified technician. • Never pull the cord/cable to disconnect from the power outlet. Always grasp the plug and pull to disconnect. •... -
Page 7: Specifications
SPECIFICATIONS & DISPOSAL SPECIFICATIONS Model No.: NJD-C-06 Size: 17cm x 9cm x 139cm (including strap [approx.]) Weight: 1.04kg(unit only) Adapter: input 100-240V ~50/60Hz 0.5A, output 12V DC 1.5A Vibration Belt: 12V DC. 28W Made in China Disposal of Old Electrical & Electronic Equipment... - Page 8 E&OE 1114...
Need help?
Do you have a question about the NJD-C-06 and is the answer not in the manual?
Questions and answers