Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for JML exakt EC310-AS
- Page 1 EC310-AS InstructIons EC310-AS JML America LLc, 7850 ruffner Avenue, Van nuys cA 91406 JML America LLc, 7850 ruffner Avenue, Van nuys cA 91406 www.JMLAmerica.com, Made in Pr china www.JMLAmerica.com, Made in Pr china ©JohnMillsLtd/Ps/10.08/EX/A...
- Page 2 English extraction and collection facilities, ensure these are connected and properly used. use of these devices can reduce dust related hazards. gEnERAl POWER TOOl sAFETY WARnings 4. Power tool use and care WARning! Read all instructions. Failure to follow all a) Do not force the power tool.
- Page 3 2. Causes and prevention of kickback: d) Have defective switches, guards and components replaced EC-310-As safety Warnings by an authorised service facility. Inspect extension cords • Kickback is a sudden reaction to a pinched, bound or periodically. If the supply cord becomes damaged it should misaligned saw blade, causing an uncontrolled saw to lift up OPERATing insTRUCTiOns only be replaced by the manufacturer or its service agents.
- Page 4 the saw will cut up to 12 mm deep. Material up to twice as d) cutting out tips: thick can be cut if cutting is performed on both sides. • If the cut is to be covered, for example by a vent cover, the corners can be overlapped to ensure that the waste material holding and switching On is completely detached.
- Page 5 c) to attach the hose disconnect the tool from the mains supply. nB. never replace this washer with anything other than an Gearbox reduction ratio 8.8:1 Press the hose end with the metal clip onto the dust outlet EXAKT replacement part. (see list of user-replacable Approximate weight 2.65Ib (1.2kg) nozzle only as far as the raised ridges on the tool body.
- Page 6 JMl America llC 7850 Ruffner Avenue, Van nuys CA 91406 www.JMlAmerica.com Made in PR China Patents apply. Registered design. The EXAKT logo is a registered trade markMade in PRC. INSTRUCTIONS • ENGLISH...
Need help?
Do you have a question about the exakt EC310-AS and is the answer not in the manual?
Questions and answers