Panasonic TC-26LX600 Service Manual page 9

1. Remove all the screw from the back cover indicated with
arrows.
Without the back cover
1. First remove the two screws from each bracket one
located on top and one on the bottom.
P-Board Disassembly
1. To remove the P-Board remove the screws indicated on
the figure above by arrows.
AP-Board Disassembly
1. To remove the AP-Board first lift the four connectors
then remove the screws indicated on the figure above
by arrows.
Bracket Disassembly
1. To remove the bracket shown above remove the screws
indicated on the figure above by arrow.
9