Download Print this page

Electromagnetic Interference/Compatibility - J&M JMDM-IPBT-JCB03 Installation & Operation Instructions

Digital stereo music/ipod/bluetooth controller

Advertisement

Product Description
Safety & General Information
Package Contents
1. Product Description
Stream music videos down off of You-Tube with your favorite
Smartphone, and direct by Bluetooth these audio signals right into
the aux input cable of the JMCB-2003.
You can also stream stereo music down off of Pandora and/or
your SmartPhones's own internal music files, and direct them by
Bluetooth into the JMCB-2003, thru this Bluetooth enabled digital
music controller.
These exciting music streaming features will work with an iPhone,
Android, Blackberry, Samsung NOTE or almost any Smartphone
available in the marketplace today that incorporates Bluetooth as
part of its design.
This new digital music controller will also connect to a standard
iPod by wire and direct the stereo music into the JMCB-2003's
audio system aux input, using the iPod's own onscreen controls,
while at the same time keeping the iPod fully charged.
A Smartphone or Garmin Zumo can also be linked by Bluetooth
to the J&M music controller, while an iPod is simultaneously con-
nected by wire, and when a navigation command or cell phone call
is received, it will automatically interrupt the iPod music signal into
the system.
When initiating or answering a cell phone call on-screen, the rider
and/or passenger can talk over the cell phone using the very
same J&M corded helmet headsets already connected to the
JMCB-2003, that are normally used for CB and intercom functions.
This digital music controller is designed to plug right in to the
JMCB-2003E/K models and will also work with the earlier JMCB-
2003B model systems, with the #JMDM-ADT-JCB03 adapter, as an
extra cost item.
This controller wiring harness also provides for direct plug-n-play
of the custom J&M CFRG type radar detector adapter harnesses,
(extra cost item) for automatic radar beep alert into one head-
set speaker, along with a power/ground source connection for a
Garmin Zumo.
This digital music controller Bluetooth/Smartphone/iPod kit
includes all direct plug-n-play harnesses for the JMCB-2003E/K
audio system, wired extension cable for iPod, & 3.5mm aux exten-
sion cable.
Important Note: This 'J&M digital music player with Bluetooth is
NOT completely weather resistant, much like a cell phone, so it
is important during the installation that the unit control head be
mounted & stored in some type of compartment or pouch on the
motorcycle, so that it is not exposed to significant amounts of
moisture, as water damage is not covered under the warranty for
this item.
Supported Bluetooth Profiles
A2DP (Advanced Audio Distribution Profile)
HFP (Hands-free Profile)
HSP (Headset Profile)
AVRCP ( Audio Video Remote Control Profile)
Table of Contents
Section 1
Installation Instructions
Section 2
General Operation Instructions
Section 3
Bluetooth Linking/Pairing Scenarios
2. Safety and General Information
IMPORTANT INFORMATION FOR SAFE AND EFFICIENT
OPERATION. READ THIS INFORMATION BEFORE USING YOUR
DEVICE.
Users are not permitted to make changes or modify the device in
any way. Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation. See FCC 47 CFR Sec. 15.19 (3).

ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY

Note: Nearly every electronic device is susceptible to electro-
magnetic interference (EMI) if inadequately shielded, designed or
otherwise configured for electromagnetic compatibility.
FACILITIES: To avoid electromagnetic interference and/or com-
patibility conflicts, turn off your device in any facility where posted
notices instruct you to do so. Hospitals or health care facilities
may be using equipment that is sensitive to external RF energy.
AIRCRAFT: When instructed to do so, turn off your device when
on board an aircraft. Any use of a device must be in accordance
with applicable regulations per airline crew instructions.
MEDICAL DEVICES
HEARING AIDS: Some devices may interfere with some hearing
aids. In the event of such interference, you may want to consult
with your hearing aid manufacturer to discuss alternatives.
OTHER MEDICAL DEVICES
If you use any other personal medical device, consult the manu-
facturer of the device to determine if it is adequately shielded
from RF energy. Your physician may be able to assist you in
obtaining this information.
Industry Canada Notice to Users: Operation is subject to the fol-
lowing two conditions: (1) This device may not cause interference
and (2) This device must accept any interference, including inter-
ference that may cause undesired operation of the device.
FCC Notice to Users: This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residen-
tial installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or
more of the following measures:
Section 4
Section 5
Section 6

Advertisement

loading