Table of Contents
Advertisement
3D Eyewear - Functions
■
Part names and functions
Power button / Mode change / Indicator lamp
Power button
●
– Press and hold for approx. 1 second to turn the 3D Eyewear on.
(The indicator lamp lights for 2 seconds.)
– Press and hold for 3 seconds or more to turn the 3D Eyewear off.
(The indicator lamp lights 3 times.)
Mode change
●
– Press and hold for approx. 1 second to change the mode between
3D and 2D (view a 3D image in 2D).
– When power is off, press and hold for approx. 5 seconds to change
to registration mode.
Watching > 3D > 3D Eyewear - Registration
Indicator lamp
●
– Lights or flashes during use to show the status (see below).
Protection film
– Peel off the protection film on both side of the lens.
Insulating sheet
– When using for the first time, remove the insulating sheet. Pull the
insulating sheet.
Battery cover
– To replace the battery
Watching > 3D > 3D Eyewear - Replacing battery
- 73 -
Advertisement
Table of Contents
