Summary of Contents for Cybernet ZPC-9000
-
Page 2: Unpack The Box
2. Remove the documentation package from the accessories box for important information. If you did not purchase an operating system with your ZPC-9000 unit, then you must use the ZPC-9000 drivers CD supplied to install your own operating system. CHECK THE COMPONENTS Your computer comes with: •... -
Page 3: Connect The Power Cable
1. Connect the AC power cable to the ZPC-9000 AC adapter unit. 2. Connect the AC adapter unit to the DC-IN on the back of the ZPC-9000 unit. 3. Connect your Monitor cable to the appropriate connector on the back of the ZPC-9000 unit. - Page 4 TURN IT ON...
- Page 5 AND SET IT UP Press the power button to turn on your system Before you call Fill out the registration card. The information on this card will help the Technical Support Representative to address your concern more quickly. Keep the card in your records for future reference. For faster service, write down all relevant information that pertains to the problem, such as error messages and software used (with version numbers).
- Page 6 www.cybernetman.com 888-834-4577...
- Page 7 ZPC-9000 WARRANTY REGISTRATION CARD First Last Name Name Company Street Address 1 Street Address 2 Suite / Apt City State Zip Code Country Phone E-Mail Serial Number Place Of Purchase Date of Purchase Comments...
- Page 8 PLACE STAMP HERE CYBERNET WARRANTY DEPT – BLDG 201 5 HOLLAND IRVINE, CA 92618...