Contents Safety Precautions Safety Precautions ..........1 Please read these instructions fully Environmental Information ........2 before installing or operating. TV - Features ............3 Preparation Viewing the TV ............3 Place the device on a solid even surface. For Accessories included ..........
Power cord and plug Headphone Volume • The power cord plug should be easily accessible. • Excessive sound pressure from In case of storms and lightning, when going on earphones and headphones can cause holiday, or when the TV is not used for a long period hearing loss, please take care.
TV - Features Viewing the TV • Remote controlled colour LED TV. • Fully integrated digital/cable/satellite TV (DVB- T/C/S-S2). • HDMI connectors for digital video and audio.This connection is also designed to accept high definition signals. • USB input. • Programme recording. •...
TV Control buttons & Operation Accessories included Remote Control Batteries: 2 x AAA Instruction Book Side AV Connection Cable Nero Media Home CD 1. Up direction 2. Down direction 3. Programme/Volume / AV / Standby-On selection switch Operation with the Buttons on the TV Volume Setting •...
Viewing remote control 1. Internet 2. Play (in Media Browser mode &Playback mode) 3. Programme recording 4. Fast rewind (in Media Browser mode) 5. No function 6. Mono/Stereo - Dual I-II / Current Language 7. Image size 8. Teletext / Mix 9.
Viewing the Connections NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection. See the illustrations above. | To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION cable’s WHITE & RED inputs.
To turn off the TV completely, remove the power Installing the Batteries to the Remote cord plug from the mains power socket. 1. Lift the cover on the back of the remote upward Note: When the TV is switched to standby mode, standby LED gently.
Page 9
If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234. Press OK button on the remote control to continue and the following message will be displayed on the screen. You can activate Store mode (optional) option by Press OK button to quit channel list and watch TV.
After this operation, you can set Search Step as 8000 Media Playback via USB Input KHz or 1000 KHz. You can connect a USB hard disk drive or USB If you select 1000 KHz, the TV will perform search memory stick to your TV by using the USB inputs of process in a detailed way.
Using MENU button in Media Browser Mode Using the Channel List Pressing MENU button in Media Browser mode displays the following menu screen: You can access Picture, Sound and Settings menu options using this screen. Press MENU again to exit from this screen.
Menu Features and Functions Picture Menu Contents For your viewing requirements, you can set the related mode option. Picture mode Mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen.
Menu Features and Functions Advanced Settings Depending on the resolution and scan frequency that you input to the TV set, you Phase (in PC mode) may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.
Menu Features and Functions Settings Menu Contents Conditional Access Controls conditional access modules when available. Language Configures language settings. Configures parental settings. Default PIN code can change depending on the selected country. Parental If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234.
Menu Features and Functions Other Settings: Displays other setting options of the TV set: Store Mode If you are displaying the TV in a store, you can activate this mode. While Store (optional) Mode is enabled, some items in the TV menu may not be available to be set. DLNA Renderer feature allows you to share files stored on your smartphone.
Set Timer / Delete Timer Electronic Programme Guide (EPG) After you have selected a programme in EPG menu, Some, but not all channels send information about the press the OK button and and Options screen will current and next programmes. Press the EPG button be displayed.
Record, Play, Pause, Display (for PlayListDialog) keys Slow Forward could not be used when teletext is ON. If a recording If you press (PAUSE) button while watching starts from timer when teletext is ON, teletext is recorded programmes, slow forward feature will be automatically turned off.
Connectivity Functions Connecting to a Wired Network For connecting to a wired LAN network, you should perform the following steps: • Connect broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem. • Ensure that Nero Media Home software is installed to your PC.(for DLNA function).
Network Type • The transmission speed differs depending on the distance and number of obstructions between the Network type can be set as Wired device. transmission products, the configuration of these Configuration Status products, the radio wave conditions, the line traffic, and the products that you use.
Subtitle files do not work if you watch video from network through DLNA. You can connect only one television with DLNA to same network. If a problem occurs with DLNA network, please switch on/off your television. Trick mode and jump are not supported with DLNA function. CAUTION: There may be some PC’s which may not be able to utilize the DLNA function due to administrator and...
You can download or upload satcoDX data. In order Teletext to perform these functions supported for satcodx “ ” Teletext / Mix: Activates video text mode when feature, a USB device must be connected to the TV pressed once (if available in your broadcast). Press in the first place.
3) 3.AM search and upgrade mode 3. Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve • If Automatic scanning in Upgrade Options menu the picture quality by changing the direction of the is enabled, TV wakes up at 03:00 and searches aerial.
Internet Connection Not Available / DLNA Mode Not Operating If the MAC address (a unique identifier number) of your PC or modem has been permanently registered, it is possible that your TV might not connect to the internet. In such a case, the MAC address is authenticated each time when you connect to the internet.
Appendix A: PC Typical Display Appendix B: AV and HDMI Signal Modes Compatibility The following table is an illustration of some of the typical video display modes. Your TV may not support Supported Source Available Signals all resolutions. Your TV supports up to 1920x1200. Index Resolution Frequency...
Appendix D: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x400 þ 640x480 þ þ þ þ 800x600 þ...
Appendix E: Nero MediaHome Installation This software is compatible with Windows XP and Windows 7. To install Nero MediaHome, please proceed as follows: Note: To use DLNA function, this software should be installed to your PC. 1. Insert the Nero MediaHome installation disc in your optical disc drive.
Page 28
7. Use Typical installation and click the Next 10. Installation finishes. button. The Help us to Enhance Nero Software screen is • The Prerequisites screen is displayed. displayed. In order to offer a better service, Nero is collecting anonymous data to determine which The Nero MediaHome installation wizard checks the features are used and what problems, if any, occur.
DVB-C MPEG4 HD DVB-S / S2 MPEG2 DVB-S / S2 MPEG4 HD RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 10000 CHANNEL INDICATOR On Screen Display 15. You can display all media types from the library. RF AERIAL INPUT Click Refresh icon to refresh.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...