Web Filtering Http Upload Enhancements; Traffic Shaping Enhancements; Firewall Load Balancing Virtual Ip Changes; User Session Persistence - Fortinet Gate 60D Administration Manual

Version 4.0
Hide thumbs Also See for Gate 60D:
Table of Contents

Advertisement

Web filtering HTTP upload enhancements

Web filtering HTTP upload enhancements

Traffic shaping enhancements

Firewall load balancing virtual IP changes

User session persistence

Health Check Monitor

Load balancing server monitor

36
You can use web filtering to block HTTP uploads or, optionally, to send cached file data
slowly to prevent the server from timing out during file scanning. This is a new option in the
Web Filter part of the protection profile. For more information, see
on page
411.
Traffic shaping settings are now configured outside the firewall policy under the Traffic
Shaper menu. You can configure multiple traffic shapers and add them to different firewall
policies.
P2P traffic shaping is configured in the protection profile with separate settings for each
direction.
For more information, see
In FortiOS 4.0, server load balance Virtual IPs (VIPs) are configured separately from other
VIPs. To configure load balance VIPs, go to Firewall > Load Balance.
In previous releases of FortiOS, you created VIP mappings between one or more real
servers and an external IP address. In FortiOS 4.0, you first define virtual servers. Then
you define real servers and associate them with the virtual servers.
For more information, see
When you create a virtual server, you can now enable user session persistence by using
an HTTP cookie or the SSL session ID. In the CLI configuration for a VIP, config
firewall vip, you can set the duration, domain and other properties of the cookie.
As in FortiOS 3.0, you can define health check monitors. The Health Check Monitor tab
has moved to the Load Balance page from the Virtual IP page, but is otherwise
unchanged. You select the health check monitors in the virtual server configuration. For
more information, see
"Configuring health check monitors" on page
A new monitor page (go to Firewall > Load Balance > Monitor) shows the status of each
virtual server and real server. For more information, see
page
395.
"Traffic Shaping" on page
"Firewall Load Balance" on page
What's new in FortiOS 4.0
"Web Filtering options"
423.
389.
393.
"Monitoring the servers" on
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
http://docs.fortinet.com/
Feedback

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents