Advertisement
Quick Links
Advertisement
Summary of Contents for T Scale T28
- Page 1 Weighing Scales...
- Page 2 T28 w eighing scales operation manual T28 w eighing scales operation manual REV C1, June 2012 5.10 Set A/D speed After enter setting mode, display shows “F0 CAL”, press ZERO key eight times, display shows “F8 SPD”, press TARE/UNIT key to enter, CONTENTS press ZERO key select the A/D speed (7.5, 15, 30), press TARE/UNIT...
- Page 3 1. INTRODUCTION off, on: always on), press TARE/UNIT key to sure, press TARE/UNIT The T28 series of weighing scales provides an accurate, fast and key and ZERO key at the same time to escape. versatile series of general purpose waterproof weighing scales. There are 4 models of scales within the range.
- Page 4 STABLE indicator on, press TARE/UNIT key to the display, leaving zero on the display. The "NET" indicator will be on. sure, display shows “SUCC”, after T28 selfchecking again, T28 is ready As product is added only the weight of the product will be shown. The for you.
Need help?
Do you have a question about the T28 and is the answer not in the manual?
Questions and answers
How can I change d=2g to d=1g