Advertisement
HOW TO OPERATE...cont.
4. Follow the coffee manufacturer's recommended serving size and add
coffee to the permanent coffee filter for each cup desired, increasing
or decreasing to suit individual taste.
5. Press BREW/OFF. The BREW/OFF light will turn on, and the
display screen will show a dot next to BREW. The brew cycle will
begin. This will take approximately 9 to 12 minutes to complete.
This function is programmed for 12 cups of coffee. For 1-4 cups
please refer to the directions in the following section.
6. After the cycle is complete, the coffee maker will beep twice and
the BREW/OFF light will turn off. The coffee maker will go into "Keep
Warm" mode. After 2 hours, the coffee maker will automatically shut
off.
NOTE: If any buttons are pushed while the coffee maker is in the process
of brewing, this will cancel the brew cycle. To restart, press
BREW/OFF again.
BREWING 1-4 CUPS OF COFFEE:
1. Make sure the coffee maker is on a dry, level, heat-resistant surface.
2. Fill the glass coffee carafe with 1-4 cups of cool water and pour
into the water reservoir.
3. Make sure the filter basket and permanent coffee filter are properly
seated and the handle on the filter basket is in the locked position.
4. Add coffee to permanent coffee filter, increasing or decreasing to suit
individual taste.
5. Press the 1-4 CUPS button. The display screen will show a dot next
to BREW and the 1-4 CUPS button will be illuminated. The brewing
cycle will begin and this will take approximately 3 to 4 minutes to
complete.
6. After the cycle is complete, the coffee maker will beep twice
and the 1-4 CUP light will turn off.
NOTE: If any buttons are pushed while the coffee maker is in the
process of brewing, this will cancel the brew cycle.
To restart, press BREW/OFF again.
UTENSILS & COOKING
8
HOW TO OPERATE
HOW TO OPERATE...cont.
PROGRAMMABLE BREW START (DELAY BREW) FUNCTION
FOR 12 CUPS:
1.
Prepare the coffee maker by adding water and coffee for brewing
as you would for immediate brewing.
2.
Press DELAY BREW. The DELAY BREW light will turn on and the
display screen will flash.
3.
While the display is flashing, set the time you would like your
coffee to start brewing by pressing the HOUR and MIN buttons.
NOTE: If the display returns to the current time before the desired brew
start time is entered, press DELAY BREW again and then press
HOUR or MIN button to continue setting the brew start time.
4.
Making sure the DELAY BREW light is illuminated, press the
BREW/OFF button. The coffee maker will beep once and the
BREW/OFF light will turn on. The display will show a dot next to
DELAY.
5.
The coffee maker will begin brewing at the set time. The dot next to
DELAY will turn off and the dot next to BREW/OFF will be shown.
After the brew cycle is complete, the BREW light will turn off, and
the coffee maker will beep twice and switch to Keep Warm mode.
PROGRAMMABLE BREW START (DELAY BREW) FUNCTION
FOR 1-4 CUPS:
1.
For delayed brewing using the 1-4 CUP setting, prepare the water
and coffee grounds for 4 cups.
2.
Press DELAY BREW button to turn on. The DELAY BREW light will
turn on, and the display screen will flash.
3.
While the display is flashing, set the time you would like your
coffee to start brewing by pressing the HOUR and MIN buttons.
NOTE: If the display returns to the current time before the desired
brew start time is entered, press the HOUR or MIN button to
continue setting the brew start time
4. Making sure the DELAY BREW light is illuminated, press the 1-4
CUP button. The coffee maker will beep once and the 1-4 CUP light
will turn on.The display will show a dot next to DELAY.
5. The coffee maker will begin brewing at the set time. After the
brew cycle is complete, the Coffee Maker will beep twice and
7
the dot next to BREW and the 1-4 CUPS light will turn off.
CUSTOMER REVIEWS
8
Ginnys.com • 1.800.544.1590
9
9
Advertisement
