Full Boar FBT-0700 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

KNOW YOUR PRODUCT

ROTARY HAMMER

DRILL KIT

• 9 jOULES

• 1050w

INSTRUCTION MANUAL

WARNING: Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

09/15

Table of Contents

Need help?

Do you have a question about the FBT-0700 and is the answer not in the manual?

Questions and answers

Summary of Contents for Full Boar FBT-0700

Page 1 KNOW YOUR PRODUCT ROTARY HAMMER DRILL KIT • 9 jOULES • 1050w INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 09/15...
Page 2: Specifications
SPECIFICATIONS - MODEL NO. FBT-0700 Voltage: 230-240V ~50Hz Power: 1050W Impact Power: 9.0J 0-4,100/min̄ ¹ Impact Rate: 0-500min̄ ¹ No Load Speed: Accessory Fitment: SDS Max Drilling Capacity: 38mm Weight: 6.9kg KNOW YOUR PRODUCT 1. SDS Max Accessory Holder 8. Soft Grip Rear Handle 2.
Page 3: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS............Page 02 KNOW YOUR PRODUCT........... Page 02 INTRODUCTION............Page 04 SAFETY INSTRUCTIONS........... Page 04 SET-UP................ Page 08 CHOOSING AN OPERATION MODE....... Page 09 OPERATION............... Page 10 MAINTENANCE............Page 11 TROUBLE SHOOTING ..........Page 12 DESCRIPTION OF SYMBOLS........Page 13 CONTENTS..............
Page 4: Introduction
INTRODUCTION Congratulations on purchasing a Full Boar Rotary Hammer. Your Full Boar Rotary Hammer Drill Kit FBT-0700 has been designed to rapidly drill, chip, chisel and break masonry products such as concrete. Read and understand the Owner’s Manual before operating the rotary hammer.
Page 5 GENERAL SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Page 6 GENERAL POWER TOOL SAFETY WARNINGS c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d.
Page 7 ROTARY HAMMER DRILL SAFETY WARNINGS WARNING! Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks, cement and other masonry products, and; • Arsenic and chromium from chemically-treated timber.
Page 8: Set-Up
WARNING! Ensure the tool is turned off and disconnected from the power supply before performing any of the following operations. Using the Depth Rod The Full Boar FBT-0700 comes with a depth rod that allows you to drill to a predetermined depth. 1. Loosen the depth rod securing nut then insert the depth rod (Fig.
Page 9: Choosing An Operation Mode
CHOOSING AN OPERATION MODE The Full Boar FBT-0700 has 3 different operating modes: hammer drilling, chiselling (locked) and chiselling (free rotation). Follow the below instructions to select your desired mode of operation. Side Mode Selector Hammer Drilling Rotate the side mode selector to the drill and hammer icon.
Page 10: Operation
OPERATION 1. Ensure your workpiece is securely clamped where possible. 2. Connect the tool to the mains power supply. The ready for use indicator LED will illuminate when the tool is connected to power and ready for use (Fig. 5). 3.
Page 11: Maintenance
MAINTENANCE • K eep the ventilation vents of the rotary hammer drill clean at all times. • A fter each use, blow air through the rotary hammer drill housing to ensure it is free from all dust particles which may build up. Build up of dust particles may cause the rotary hammer drill to overheat and fail. • I f the enclosure of the rotary hammer drill requires cleaning, do not use solvents but a moist soft cloth only. Never let any liquid get inside the rotary hammer drill; never immerse any part of the rotary hammer drill into a liquid.
Page 12: Troubleshooting
TROUBLESHOOTING Problem Cause Remedy Rotary Hammer Drill No power supplied Make sure all plugs are connected and power outlet is in working is not working order Mode Selector in wrong Please refer to ‘Operating The position. Hammer Drill’ section in the manual.
Page 13: Description Of Symbols
DESCRIPTION OF SYMBOLS Volts Hertz Alternating current Watts Revolutions or No load speed reciprocation per minute Millimetres Diameter Double insulated Regulator compliance mark Read instruction manual Warning Wear ear protection Wear eye protection CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way.
Page 14: Contents
CONTENTS 1 x Rotary Hammer Drill 1 x Dust Cover 1 x Depth Rod 1 x Carry Case 1 x 350mm Flat Chisel Bit Note. The manufacturer’s liability shall be deemed void if the machine is modified in any way and the manufacturer shall therefore accept no liability for any damages arising as a result of modifications.
Page 16: Warranty
WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE (see www.bunnings.com.au or www.bunnings.co.nz for store locations) WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia 1800 069 486 New Zealand 0508 069 486...