Cleaning the Brush Rollers Clog Removal Clogs in the Airflow Pathway Clogs in the Swivel Neck Trouble-Shooting Guide Acclaim 12 Powerhead Schematic and Part Numbers Acclaim 15 Powerhead Schematic and Part Numbers Warranty Information TECHNICAL DETAILS Acclaim 12 Acclaim 15 Brush motor 175 Watts, 1.6 Amps...
15. Maintenance and repairs must be done by qualified not in use and before servicing. personnel. 16. Use only original Acclaim by SEBO replacement parts. 2. Do not use outdoors or on wet surfaces. 17. Do not use Powerhead as a step.
Acclaim POWERHEAD PRODUCT FEATURES Your Acclaim 12 and Acclaim 15 Powerheads are designed for use with central vacuum units. The Acclaim 12 (12 inches wide, Manual and Automatic Brush Shut Off – The 10 1⁄2-inch cleaning path) and Acclaim powerhead can clean delicate rugs or Acclaim 15 (14 3⁄4 inches wide,...
OPERATING INSTRUCTIONS Operating the Powerhead - Figures 1 & 2 A. When the Powerhead is switched on with the swivel neck (#3, figure 2) in the upright locked position, the brush roller will not spin and the on/off light will illuminate in yellow*.
MAINTENANCE Always disconnect powerhead from power source before dismantling any part of the machine! Removing the Brush Roller - Figure 4 To remove the brush roller, press the button marked “PRESS” (#10) and turn the brush roller end cap downward. Turn the brush (#12) slightly to the right and pull it out.
TROUBLE-SHOOTING GUIDE Always disconnect the powerhead before dismantling any part of the machine! PROBLEM REASON SOLUTION 1. The switch on the powerhead 1. Press the powerhead brush Powerhead does is off. on/off switch if available. not turn on* See page 5. 2.
§ Normal maintenance, such as the removal of clogs. § Damage caused by external sources, such as liquids, hot 3. To locate an authorized SEBO dealer in your area, or to materials, weather or proximity to heat, e.g., fires, ovens, register a warranty claim in the United States, please radiators, etc.
Need help?
Do you have a question about the ACCLAIM 12 and is the answer not in the manual?
Questions and answers