Table of Contents
Advertisement
Type Compakt Comfort = CC-2
The basis for working with the
operating manual and that for the attachments as well as the engine manufacturer's operating
manual. You may not commence with the operation before having done so. It is forbidden to
Rev. date / edition
3/8/2010
Retain for future reference!
Operating manual
2-wheel tractor
optionally with swivel steering shaft
2-wheel tractor is that you read, understand and follow this
start work without observing this manual!
No. 02-2010
☺
Type CC-2 = Compakt Comfort
for
M O T O R GE R ÄT E F AB R I K
94163
(0 99 07) 89 10-0 Fax (0 99 07) 10 42
ENTSCHENREUTH
Internet: http://www.koeppl.com
email: info@koeppl.com
Advertisement
Table of Contents
Summary of Contents for Koppl compakt comfort CC-2
- Page 1 Type CC-2 = Compakt Comfort Operating manual 2-wheel tractor Type Compakt Comfort = CC-2 optionally with swivel steering shaft The basis for working with the 2-wheel tractor is that you read, understand and follow this operating manual and that for the attachments as well as the engine manufacturer’s operating manual.
-
Page 2: Compakt-Comfort
Compakt-Comfort-2 Notes Translation of the original manual Page 2 Version 02-2010... -
Page 3: Table Of Contents
Compakt-Comfort-2 Table of contents Table of contents Table of contents ..........................3 Foreword............................. 4 Appropriate use ........................... 5 General safety instructions ........................6 Possible hazards in dealing with the 2-wheel tractor................... 6 Explanation of the safety symbols used ........................ 6 Hazards due to accessories.......................... -
Page 4: Foreword
Compakt-Comfort-2 Foreword Foreword Before putting the 2-wheel tractor into operation, it is absolutely essential to read and follow the instructions regarding appropriate use, the operating manual and the safety instructions as well as the operating manuals for the attached devices operated with the 2-wheel tractor! The guarantee only applies in the case of proper operation! -
Page 5: Appropriate Use
Compakt-Comfort-2 Appropriate use Appropriate use 2-wheel tractor (type Compakt Comfort CC-2) is designed for normal use and work in agriculture and forestry, such as the mowing of grass and meadows, only in conjunction with the respective original attached devices, depending on the steering shaft position: Front attachment: for mowing, cleaning, snow hoeing, snow clearing, transportation, harrowing and transport bin. -
Page 6: General Safety Instructions
Compakt-Comfort-2 General safety instructions General safety instructions Possible hazards in dealing with the 2-wheel tractor. In the case of incorrect operation or misuse, there is a danger of • injury to or death of the operator, • damage to the 2-wheel tractor and other property belonging to the user, •... -
Page 7: Hazards Due To Accessories
Compakt-Comfort-2 General safety instructions Hazards due to accessories Attached devices, mowing devices and any other additional devices used must not disable the safety devices of the 2-wheel tractor. Noise/vibration values Noise information (sound power level EN ISO 3744) - emissions Noise information (sound pressure level EN ISO 11201) - immissions Vibrations (hand/arm vibrations DIN 45675 Part 8) - immissions The A-weighted emission sound pressure level of the... -
Page 8: Sources Of Danger
Compakt-Comfort-2 General safety instructions Sources of danger 2-wheel tractor may be used on both commercial and private properties. • Check that the unit is safe to operate and to be used in traffic each time before putting it into operation! •... -
Page 9: Operator Position, Danger Area
Compakt-Comfort-2 General safety instructions If the single-axle tractor is driven from a single-track seat trolley, this must be fitted with a triangular rear reflector and a rear light (Article 53, Section 6, German Highway Code); blinkers (direction indicator lights) are not required for a seat trolley (Article 54, Section 5, No. 5, German Highway Code). -
Page 10: Requirements For The Operating Personnel
Compakt-Comfort-2 General safety instructions Working on slopes with a gradient higher than 40% or in uneven terrain On slopes with a gradient of over 40% or in uneven terrain, the device can slip or tip over; the danger zone is extended by the possible slipping or tipping area of the machine. •... -
Page 11: Personal Protective Equipment
Compakt-Comfort-2 General safety instructions Personal protective equipment For operation Wear sturdy shoes. Wear tight-fitting clothes. You should wear suitable ear protectors in the case of long work periods. For cleaning Wear sturdy safety gloves (leather) to protect against sharp objects (attached devices) For grinding the mowing blades Wear safety goggles Safety measures at the place of work... -
Page 12: General Safety Instructions
Compakt-Comfort-2 General safety instructions General safety instructions • Watch out for fuel and oil leaks and eliminate them if necessary. • Check screws, nuts and bolts regularly for tightness and tighten them if necessary – after the first time of use and if circumstances demand. •... -
Page 13: Leaving The 2-Wheel Tractor
Compakt-Comfort-2 General safety instructions The protective devices • have been installed for the safety of the operator and • must not under any circumstances be modified, removed or circumvented by means of modifications to the 2-wheel tractor. The safety stop lever serves as an emergency stop switch in dangerous situations where fast switch-off is required. -
Page 14: Transport
Compakt-Comfort-2 Transport Transport In order to avoid damage to the machine and life-threatening injuries when transporting the machine, it is essential to pay attention to the following points: • Transport work may be carried out only by persons who are qualified for such work, observing the safety instructions. -
Page 15: Technical Data
Compakt-Comfort-2 Transport Technical data HYDRO HYDRO Compakt Comfort Compakt Comfort CC-2 CC-2 with mechanical control with electronic control Engine at rear Infinite Infinite No. of gears Twist-grip Easy-Drive Working speed Forward: 0 – 8.0 km/h Forward: 0 – 8.0 km/h (with 5.00x10 tyres) Reverse: 0 –... -
Page 16: Operation
Compakt-Comfort-2 Operation Operation In order to avoid damage to the machine and life-threatening injuries when putting the machine into operation, it is essential to pay attention to the following points: You must have read and understood • Chapter 1 ‘General safety instructions’ •... -
Page 17: Forward/Reverse Shifter (F/R)
Compakt-Comfort-2 Operation Push the choke knob slowly back to the operating position if it has been pulled out. Also refer to the engine manufacturer’s operating manual regarding this point. In the case of a diesel engine, attention must be paid to the the start direction according to the engine manufacturer! Switching the engine off: First release the safety stop lever, then switch the engine off. - Page 18 Compakt-Comfort-2 Operation Engine at rear ORWARD AND REVERSE DRIVING Working position – FRONT ATTACHMENT FORWARDS REVERSE Front attachment The operating speed can be infinitely adjusted by twisting the twist-grip A. Driving forward Turn twist-grip A clockwise (see fig. 05). Direction of Direction of rotation Driving in reverse...
- Page 19 Compakt-Comfort-2 Operation ORWARD AND REVERSE DRIVING Working position – REAR ATTACHMENT - only with the swivel steering shaft Warning! Use of the hoe when driving in reverse (attachment at the rear) is forbidden! The power take-off may be switched off and on only in the Drive OFF position of the safety stop lever and in the 0 position of the twist-grip A.
-
Page 20: Clutch/Safety Stop Lever
Compakt-Comfort-2 Operation Stopping Press the rocker switch in the opposite direction until the machine stops moving Pushbutton press the STOP pushbutton – the machine STOP is brought slowly to a halt release the clutch/safety stop lever (EMERGENCY STOP) - the drive is stopped immediately!! The actuating cylinder on the pump Direction of returns automatically to the 0 position. -
Page 21: Turnaround Active Steering
Compakt-Comfort-2 Operation Turnaround Active Steering Compakt-Comfort CC-2 is a further development of the 2-wheel tractors - so that you can work more effectively, more efficiently, more economically and above all with more ease. For easy, agile working, an infinitely controllable hydraulic traction drive is installed in conjunction with turnaround active steering. -
Page 22: Power Take-Off Engagement/Disengagement
Compakt-Comfort-2 Operation If the hydraulics or the engine fail, the machine can be pushed by pulling levers E and F at the same time (pull only halfway). Caution! If the engine is still running and the power take-off is switched on, the attached device will continue to be driven!! Working with attached devices on a slope Caution! - Page 23 Compakt-Comfort-2 Operation When engaging the power take-off, the clutch/safety stop lever must be in the engine start position. Engage the power take-off and then slowly depress the clutch/safety stop lever at a low en- gine speed. Lever D If the power take-off does not run, release and depress the clutch/safety stop lever a few times until the power take-off runs.
-
Page 24: Stationary Wheel Lock
Compakt-Comfort-2 Operation Stationary wheel lock -Compakt-Comfort CC-2 is equipped with a stationary wheel lock. You should always use this when the engine is stopped and/or the terrain is steep. Do not use it while driving, as otherwise damage can occur. The hand lever P - see figs. -
Page 25: Engine
Compakt-Comfort-2 Operation Engine There is a choice of four-stroke petrol engines for lead-free normal petrol, or four-stroke diesel motors, which may only be operated with pure diesel oil. During the first 20 hours of operation (the running-in period) the engine should not be operated up to its performance limit. -
Page 26: Throttle Lever
Compakt-Comfort-2 Operation Throttle lever The throttle lever is located on the right-hand steering shaft (see fig. 20). Please ensure that it is adjusted correctly in accordance with the engine manufacturer’s operating manual. Engine speed regulation according to type of use (for minimisation of noise and vibration) Throttle lever –... - Page 27 Compakt-Comfort-2 Operation Proceed as follows: • Disengage the power take-off if it was engaged. • Place the twist-grip in the 0 position. • Switch the engine off, apply the parking brake or secure the machine against rolling away. • Pull grip B (fig. 22) to the stop and hold it in this position. This releases the locking bolt. •...
-
Page 28: Device Connection
Compakt-Comfort-2 Operation Swivel steering shaft – lateral adjustment The swivel steering shaft can be swivelled from its normal position by approx. 20° (fig. 24) to the left or to the right in the front and rear attachment positions. • Pull grip B (fig. 22) to the stop and hold it. •... - Page 29 Compakt-Comfort-2 Operation Arrester flange (OPTIONAL) The arrester flange consists of the attachment flange for the attached device and the base plate for the basic machine. With these two parts you can attach and detatch large and heavy attached devices with little effort. Latching bolt is locked Arrester hook Baseplate...
-
Page 30: Operating Hour Meter
Compakt-Comfort-2 Operation Connecting the attached device to the basic machine • Drive forward with the basic machine until you can insert the arrester hook into the matching part by raising the basic machine. • Drive very slowly forwards to the stop. •... -
Page 31: Troubleshooting
Compakt-Comfort-2 Troubleshooting Troubleshooting Faults and their remedy Observe the safety instructions! If faults occur in the tractor or the engine that require a greater degree of intervention, always have them rectified at your specialist workshop, since they have the necessary tools. - Page 32 Compakt-Comfort-2 Troubleshooting Fault Possible cause Remedy Engine stutters at high Ignition gap of the spark plug is too Adjust the spark plug. revs., engine often stops small. in neutral Neutral mixture is not adjusted Have the carburettor adjusted by your correctly.
-
Page 33: Maintenance
Compakt-Comfort-2 Maintenance Maintenance Besides complying with operating regulations applicable to the 2-wheel tractor, it is equally important to pay due attention to the following instructions for care and maintenance! Caution! • Care and maintenance work may only be carried out when the engine is switched off and the spark plug cap has been pulled off! •... - Page 34 Compakt-Comfort-2 Maintenance Fill the system with the prescribed or a suitable hydraulic fluid. The correct hydraulic fluid, and in particular its viscosity, is decisive for the trouble-free operation of the system. Check the hydraulic fluid for the ingress of water. Check the hose and pipe connections regularly for leaks and tighten them.
- Page 35 Compakt-Comfort-2 Maintenance • Firmly screw in the oil bleed screw on the oil filter housing. • Firmly screw in the dipstick again. • Start and let the oil pump run for a short time. • Check the piping system for leaks •...
-
Page 36: Power Take-Off Gearbox
Compakt-Comfort-2 Maintenance Important! Protect the environment: The handling and disposal of mineral oils are subject to legal regulations. Take used oil to an authorised collection point. Do not spill engine oil! Take precautions to catch spilt oil – lay out an oilproof tarpaulin and use an oil collecting pan. -
Page 37: Clutch
Compakt-Comfort-2 Maintenance • Screw in the oil drain plug firmly. • Pour in approx. 0.45 l gearbox oil through the oil filling aperture with the aid of a funnel. • Check the oil level (see above). • Screw in the vent screw. •... -
Page 38: Drive Wheels
Compakt-Comfort-2 Maintenance Adjusting screw Lock nut Clutch/safety stop lever Drive OFF Lock nut Adjusting screw Clutch bowden cable Fig. 33. Basic adjusment of the clutch/safety stop lever. Measure the length of the spring on the clutch lever in the OFF position. Depress the clutch/safety stop lever (2nd person) and measure the length of the spring again. -
Page 39: Steering Shaft
Compakt-Comfort-2 Maintenance Steering shaft Rotary block on the swivel steering shaft The rotary block on the swivel steering shaft should be lubricated via the grease nipple at least once per year and each time after cleaning. The grease nipple is located behind the lower panel (see fig. -
Page 40: Stationary Wheel Lock
Compakt-Comfort-2 Maintenance Stationary wheel lock The grease nipples of the stationary wheel lock on the left and right must be lubricated every 25 hours or once per year. Wrapping pro- tector Grease nipple Fig. 37. Lubrication point on the wrapping protector for the stationary wheel lock. Fuse Easy-Drive only Warning! -
Page 41: Attached Devices
Compakt-Comfort-2 Maintenance Attached devices In the case of attached devices not covered by this operating manual, the instructions that came with the respective attached device must be followed. General Watch out for fuel and oil leaks and eliminate them if necessary. Check the tightness of screws, nuts and bolts regularly and retighten them if necessary. -
Page 42: Maintenance Schedule
Compakt-Comfort-2 Maintenance Maintenance schedule 25 h 100 h ( 25) h 100 h 25 h (25) h Checking and maintenance overview At least once per Page year Clutch/safety stop lever 12 + 20 Function check Hand lever Check adjustment Lubricate all sliding parts Cleaning Check hydraulic pipes, hoses Check oil level in... - Page 43 Compakt-Comfort-2 Maintenance Engine maintenance: refer to the respective engine manufacturer’s operating manual Position before each start-up checking and care work that can be carried out by operator have the maintenance work carried out by a specialist workshop after each cleaning mainly with a high-pressure cleaner Page Page in the operating manual Page 43...
-
Page 44: Appendix
Compakt-Comfort-2 Appendix Appendix Lubricants / adhesives Use the specified lubricants for the gearbox (see ‘Technical data’). We recommend the use of an- ti-corrosion agents to preserve the machine and devices. Do not use for painted outer panels; an- ti-corrosion agents can be applied using a brush or a spray device. When applying adhesives (for the locking of screws) and sealing compounds, both adhesive and sealing surfaces must be clean and free of grease. -
Page 45: Accessories
Compakt-Comfort-2 Appendix Accessories Available accessories Additional equipment Wheels Mowing drives Mowing bars Double levelling rake Snow clearing, hoeing, shovelling devices Sweeping devices Rotary mowers Flail mowers General-purpose mowers Suction lawn mower Turf, field, rotary harrow Haymaker - with swivel steering shaft only (optional) Stone burier tiller - with swivel steering shaft only (optional) Flat-tyre protection:... -
Page 46: Eu Conformity Declaration
EU Conformity Declaration The manufacturer Made in Germany declares that the machine described on the 2-wheel tractor right: Type: CC 10-2 CC 12-2 CC 14-2 CC 8H-2 complies with the health and safety require- EU machine directive 2006/42/EC ments contained in the following EU directives: EN ISO 12100-1, EN ISO 12100-2, EN 12733, Harmonised standards applied: EN ISO 13857, EN ISO 14121-1, EN 349, EN 709...
Need help?
Do you have a question about the compakt comfort CC-2 and is the answer not in the manual?
Questions and answers