Summary of Contents for Lasonic LTA-260
- Page 1 LTA-260 ATSC Converter 0DTt/ [][]IOOLBVr DIGITAL DEFINtTlONTElEV1SION STANDARD Product that have earned the ENERGY STAR@ are designed to protect the environment through superior energy efficiency...
-
Page 2: Table Of Contents
ATSC Converter Box 1 . Important Safety Instru ctions ------------------------------------------------ 2. Trad ema rks --------------------------------------------------------------------- 3. Accesso ri e s --------------------------------------------------------------------- 4. Before Ope rati ng --------------------------------------------------------------- 5. Quick Reference Control Operation ---------------------------------------- 5-1 . Front Pa nel ---------------------------------------------------------------- 5-2. Rea r Pa ne I ----------------------------------------------------------------- 5-3. -
Page 3: Important Safety Instru Ctions
ATSC Converter The lighting flash with arrowhead symbol, within an equilateral triangle, intended to alert the user to the presence of un-insulated "dangerous voltage" within product's enclosure that be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the... - Page 4 ATSC Converter Box @ Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Page 5: Trad Ema Rks
ATSC Converter [Ff,CCNotice1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 6 ATSC Converter Box 4.2. Antenna Connections <D Outdoor Antenna Connection. Refer to one of the following diagrams while connecting the outdoor antenna. • Using a VHF/UHF combination outdoor antenna. A. Combination VHF/UHF Antennas VHF/UHF 300/75-ohm ANTENNA ADAPTOR (Not supplied) 300-ohm twin-lead ATSC Converter •...
- Page 7 ATSC Converter 4.3. Connect to your analog signal TV display AV Cable Connection. Please plug one terminal of the RCA Cable into the device RCA connector, and plug the other terminal into TV, YELLOW for VIDEO, RED for AUDIO (RIGHT), WHITE for AUDIO (LEFT). ATSC Converter RF Cable Connection If the TV have only RF Antenna terminal, please screw 750hm F-Type...
-
Page 8: Quick Reference Control Operation
ATSC Converter ~~~~~~~~:~~Jlo.l~ratJ~ 5.1. Front Panel Power Button: Power Indicator: Press - On means work normally, Press Again - Standby. Off means no power or standby. IR window: Infrared receiving window. 5-2. Rear Panel ANT RF IN: Antenna RF Input. AV RF OUT: AudiolVideo Video: Video Output. -
Page 9: Easy Setup For First Use
ATSC Converter SLEEP: Switch the sleep timer setting. OK: Use to confirm the channel selection and other operation. C/C: Switch Close Caption Service or On/Off. CH+/CH-: Select next / previous channel or move the highlight menu item. V-CHIP MENU: Enter or exit the V-CHIP setting menu. V-CHIP ON/OFF: V-CHIP on / off temporarily. - Page 10 ATSC Converter Press lOCHSCAN" to scan ATSC program channels. T " Press "OK" to start Auto scan, It may take you several minutes. Note: • If you use F-Cable to connect the equipment and the TV, please set "Audio Mode" to 'Mono" mode. If you change the RF Channel to CH3 or CH4, you need to rescan.
-
Page 11: Antenna Setup
ATSC Converter Press "LANGUAGE" to select OSD language: English, French, Spanish. 5-5. Antenna Setup Press "ANT LEVEL" to display Antenna Level. Press "CH+/CH." to select the channel. It will show the current channel signal strength and quality. Adjust the antenna direction and position to receive the signal strength level 60 or higher. -
Page 12: Basi C Operation
ATSC Converter 6-1. Channel Scan Press "CH SCAN" to scan the ATSC program channel, it will memory all channels found. • Press .••• ~ to select "Auto Scan", then press "OK" to beginAuto scan. 6-2. Channel Information Press "INFO"to display the program information, including: Channel number, @)Resolution,... -
Page 13: Change Viewing Channel
ATSC Converter 6-3. Select Program Channel (j) Press "CH+/CH-" to select the channel. Note: It is only valid after scanning channels. (Please refer to "CH SCAN"). Press "0-9" buttons to select the channel. [j]w[TI wwl]] [I] lIIcSIJ cB\ =\ Note: 3 digit numbers need to select the channel: Example: Input "3"... -
Page 14: Parental Control (V-Chip)
ATSC Converter Box Not all the programs and videos offer closed captioning. a> "C/C" Press to get the "Closed Caption" service: OFF ••• Service 1 ••.• Service2 ••.• Service3 ••.• Service4..ServiceS •••• Service6 ••.• Caption 1 ••.• Caption 2 ••• Caption 3-+ Caption 4 ••.•... - Page 15 ATSC Converter • TV PARENTAL GUIDELINES. Rating TV-Y All children. TV-Y? Direct to Older Children. TV-G General Audience. Based Parental Guidance Suggested. TV-PG Parents Strongly Cautioned. TV-14 Mature Audience Only. TV-MA All Scenes blocked. Fantasy Violence Scene. Violence Scene. Content Based Sexual Situation.
- Page 16 ATSC Converter Box ~ Selecting a lower age rating's content setting to block automatically change the same higher age rating's content setting to block. How to set V-CHIP. • Press "V.CHIP MENU" to access V-CHIP menu screen, and then set up V-CHIP.
- Page 17 ATSC Converter ---- I~~~-1 rl1lJ~_ ---~--"-_. -~-------_._-_._--- F lI\W@ W#i? - 16 -...
- Page 18 ATSC Converter • While program exceeds the rating setting, screen will show "V-CHIP block" , and video /audio will be blocked. 1). Press "V-CHIP ON/OFF" to inactive the V-CHIP temporarily. The correct password is needed for it. 2). If you turn the power on from off, the "V-CHIP block" will be activated again.
-
Page 19: Mute
ATSC Converter • Use "CH+/CH-" to select the Dimension and press "OK" to show all rating setting of the chosen Dimension . • Use "CH+/CH." to choose V-CHIP rating, and press "OK" to block or unblock the specific rating program. •... -
Page 20: Screen Mode
ATSC Converter 6-9. SCREEN MODE Press "SCREEN" to select screen mode: 4:3LB, 4:3PS, 16:9. Source screen: 4:3 LB screen: 4:3 screen: 16:9 6-10. SLEEP TIMER Press "SLEEP" to display current Sleep Timer Press "SLEEP" again to change the sleep timer setting: •... -
Page 21: Gen E Ra I S Pecifi Cation S
Remote control does not work. • Check the batteries are installed properly. @ The warning message about the digital broadcast. • "No Signal". Check the RF cable and antenna setup. LTA-260 Model ATSC Coupon-Eligible Converter Description F- Type Jack for ATSC Antenna. -
Page 22: Remote Controller Code
ATSC Converter 9-1. Identify custom code: OOFF. 9-2. Remote key code. @7 __ ~--~ DtafCJ INFO V.CHIP MENU V.CHIP ON/OFF @Q]~@]J [i9@]][E] [TI]@]][9 9-3. Universal Remote Controller setting For using Universal Remote Controller, please set the remote code as TOSHIBA TV or DVD. More information, please refer to the user manual of Universal Remote Controller. -
Page 23: Li M Ited Warra Nty
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of LASONIC . The warranties described herein shall be the sole and exclusive warranties granted by LASONIC and shall be the sole and exclusive remedy available to the purchaser.
Need help?
Do you have a question about the LTA-260 and is the answer not in the manual?
Questions and answers