Hanging hole display Battery compartment INSERTING BATTERIES First insert the batteries into the outdoor sensor and then into the thermometer. Open battery compartment cover. Insert 2 type AAA batteries, ensuring that the correct polarity is maintained as shown inside the battery compartment.
MANUAL SETTING In normal display mode, press and hold the "SET/°F/°C" button for a few seconds to enter the time settings. The digit being set will start fl ashing. Enter the settings by pressing the "MIN/MAX/+" button. The setting sequence is: 12/24 hour format hours minutes. Confi...
• Despite the outdoor sensor being resistant to the effects of weather, it should be located away from direct sunlight, rain or snow. The optimal location for the outdoor sensor is under the eaves on the northern side of a building with free air circulation. •...
Sensor dimensions: 60 × 27 × 96 mm Weight: 53 g Fast ČR, a.s. declares that SWS 25 (WBU,WGN,WS,BS) conforms to the basic requirements and other relevant provisions of directive 1999/5/ES. The device can be operated in the EU without restriction. The declaration of conformity is a part of the user's manual or can be found at the website www.sencor.eu.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste.
Page 9
Warranty conditions Warranty card is not a part of the device packaging. This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The claim for service can be applied either at dealer’s shop where the product was bought, or at below mentioned authorized service shops.
Page 10
Data on presented documents differs from data on products. Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor.eu for detailed information about authorized service centers.