ViewSonic Pro9510L User Manual page 26

3.
If more than one input device is
connected, press the SOURCE button
and use ▲▼ to scroll among devices.
(Component is supported through the
RGB to Component adapter.)
4.
When the "Power Off? /Press Power
again" message appears, press the
POWER button. The projector turns off.
Caution:
Do not unplug the power cord until the POWER LED stops flashing – indicating the projector has
cooled down.

HDMI 1 / MHL: High-Definition Multimedia Interface
and Mobile High-Definition Link
compatible

HDMI 2: High-Definition Multimedia Interface
compatible

DVI: DVI

VGA 1 / 2: Analog RGB
DVD input YCbCr/ YPbPr, or HDTV input
YPbPr via D-sub connector

BNC: Analog RGB

S-Video: Super video (Y/C separated)

Composite Video: Traditional composite video
13