Welcome Thank you for purchasing our DVR! This quick start guide will help you become familiar with our DVR in a very short time. Before installation and operation, please read the following safeguard and warning carefully! Important Safeguard and Warning ...
4. Turn the device upside down 6. Connect the HDD cable and Fix the HDD firmly. and then turn the screws in power cable. firmly. 7. Put the cover in accordance 8. Secure the screws in the with the clip and then place the rear panel and the side panel.
Please refer to the following sheet for detailed information. Name Function HDD status indictor light The red light becomes on when HDD is abnormal. The red light becomes on when the power Power indicator light connection is OK. Network status indicator The red light becomes on when the network light connection is abnormal.
Page 5
Click Enter or left click mouse, you can see the login interface. See Figure 3. System consists of four accounts: Username: admin. Password: admin. (administrator, local and network) Username: 888888. Password: 888888. (administrator, local only) Username: 666666. Password: 666666(Lower authority user who can only monitor, playback, backup and etc.) ...
Page 6
Figure 4 For detailed operation information, please refer to the User’s Manual included in the resources...
Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Sheet ○ ○ ○ ○ ○ ○ Metal(Case) Plastic Parts ○ ○ ○ ○ ○ ○ (Panel) ○ ○ ○ ○ ○ ○...
Need help?
Do you have a question about the SMART DVR and is the answer not in the manual?
Questions and answers