Advertisement
1
3
Unpack
Connect the keyboard and mouse
Computer
Keyboard*
Mouse*
Power cord
Publications
or
NOTE: If your computer is equipped with a wireless keyboard or mouse,
follow the installation instructions for those devices.
* Selected models only.
4
Connect the power cable
1. Some models may contain items that are not listed.
2. The descriptions in this guide might be different from what you see on your
computer, depending on the computer model and configuration.
3. Product design and specifications may be changed without notice.
2
Adjust the computer stand
25º
5
Turn on the computer
5º
Front view of the computer
or
or
Built-in microphone
Built-in microphone
Camera LED indicator
Built-in microphone
Built-in camera
3D camera
1
Selected models only.
ATTENTION: If your computer is equipped with an infrared (IR) remote
control, do not put the USB IR receiver on the same plane as the screen.
Left and right view of the computer
1
2
Hard disk indicator
Combo audio jack
USB 3.0 connector
Optical drive eject button
1
USB 3.0 connector/USB power
Optical drive or SSD
off charging connector
1
PC mode/HDMI-in switch
1
Memory card reader
Power button
1
Selected models only.
2
Combo audio jack: Used to connect headsets.
Rear view of the computer
Connecting to the Internet
To connect to the Internet, you'll need a contract with an Internet Service
Provider (ISP) and some hardware.
IPSs and ISP offerings vary by country. Contact your ISP for offerings available
in your country.
Your computer is designed to support a wireless (selected models only) or
wired network that connects your computer to other devices.
Wired network connection
For wired networks, connect one end of an Ethernet cable (purchased
separately) to the Ethernet connector on your computer, and then connect the
other end to the network router or broadband modem. Consult your ISP for
detailed setup instructions.
NOTE: Broadband modem and router installation procedures vary
depending on the manufacturer. Follow the manufacturer's instructions.
Wireless network connection
For wireless networks, you can use the built-in Wi-Fi antenna to access your
wireless home network.
To connect your computer to the wireless network:
Click or tap the network icon on the taskbar, then select the name of your
router. Click or tap Connect, then follow the steps on the screen.
Test the wireless network by opening your Web browser and accessing any
Web site.
Security cable slot
USB 3.0 connector
Power connector
1
HDMI-out connector
1
Ethernet connector
Power connector
1
HDMI-in connector
1
Air vents
USB 2.0 connectors (2)
1
Selected models only.
ATTENTION: Be sure not to block any air vents on the computer.
Blocked air vents may cause thermal problems.
Advertisement
