PANJIT Lighting LNF Series Installation Instruction

LNF Series Floodlight Installation Instruction
READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING
Cannot be used in the application where has heavy chemical & corrosive condition.
Panjit Lighting ® PanjitHT Series Floodlight is designed for use indoors and outdoors in industrial locations where moisture, dirt, corrosion, vibration, and
rough usage may be present. Typical applications include process areas, storage areas, loading docks, rail yards, building perimeters, parking areas, sports
applications, etc.
Warning: To reduce the risk of death, injury or property damage from fire, electric shock, cuts, abrasions, falling parts, and other hazards:
1. Product must be installed in accordance with your local electrical code. If you are not familiar with these codes and requirements, consult a qualified
electrician. DO NOT INSTALLED BY YOURSELF.
2. To avoid the possibility of electrical shock, turn off power supply before installation or servicing.
3. Wear gloves to prevent cuts or abrasions from sharp edges when removing from carton, handling and installing this equipment.
4. When in use the floodlight become extremely hot. Do not touch the floodlight with your bare hands.
5. The standard finishing cannot be used in heavy industrial, chemical, petrochemical or pharmaceutical facilities. For above application and special
requirement please contact Panjit lighting or your local Panjit lighting Distributor.
6. These instructions do not cover all installation, service, and maintenance situations. If your situation is not covered, or if you do not understand these
instructions or additional information is required, contact Panjit lighting or your local Panjit lighting Distributor.
 Product Dimensions
LNF-KS3XXX / LNF-KD3XXX
Single Module
360
406
 Accessory List (Optional to Purchase)
Image
Copyright © 2014, PANJIT Lighting Technology (Shenzhen) Co., Ltd.
NO.20 FACTORY, FUMIN INDUSTRIAL ZONE , PINGHU COMMUNITY PINGHU SUB-DISTRICT, LONGGANG DIST., SHENZHEN, CHINA.
Tel : +86-755-84686621
Double Module
3 6 0
4 0 6
Description
Cut-off mount kit
Part no:LON-SSL-LStand-A11
Material: steel
Pole mount kit
LON-SAL-BackPlate-A11
Material: steel
Fax : +86-755-84679570
LNF-KD6XXX
Double Module
500
546
Image
http :// www.panjitlighting.com (Panjit Lighting)
LNF-KD4XXX
Double Module
600
646
Description
Water proof cable connector
Part no: PJWCM2015
Material: silicone
Ver. 1.1
1
of 4