Advertisement
Installation
S tep 1
U
U
Drill a speaker hole in the ceiling following a pencil cutout with the dimension of bit size
(200mm), Fig 1.
S tep 2
U
U
Connect the wiring into its appropriate terminal as the positive wire from the amplifier
should be connected to:
S tep 3
U
Once wiring is connected to the speaker, center the speaker in place of the hole and
secure it by turning the mounting screws clockwise until the hooks holds the speaker
snug smoothly against the ceiling wall. Fig 3 & 4.
Note: Do not over tighten the hooks
HDL Ceiling Speaker Manual –HDL-C65P
jack & while the negative wire to: Black jack. Fig 2.
Red
www.hdlchina.com
Fig.1
Fig.2
3
Advertisement
