Operation
BEFORE WEIGHING
Be aware of the Automatic power-off function. If the Automatic power-off
function is active it will turn the balance off after 2 minutes of inactivity.
WEIGHING PROCEDURES
Press [On/Off] to turn on the balance
When power is turned on, all display segments appear on LCD for a few sec-
onds and finally on the display "0.00" will appear along with the last selected
units.
To select the weighing unit with [Unit] (if required)
Press [Unit] to select a weighing unit, eg. "g" / "ct" / "oz" or "dwt" .
Once the unit has been selected, the weight will be displayed in the selected
unit and a symbol for the weight will be shown.
Start weighing
If you do not use a container for weighing
1)
Verify the reading is "0.00". If not, press [Tare] to display "0.00".
2)
Place the objects on the weighing pan to weigh.
3)
When the reading becomes stable, the stable indicator is displayed.
If you use a container for weighing
1)
Place an empty container on the pan.
2)
Wait for the stability indicator to be displayed and press [Tare].
3)
Place the objects to be weighed in the container.
4)
When the reading becomes stable, the stable indicator is displayed.
5)
Only the net weight is displayed.
Page