Page 1
EN 61000-6-3:2007, EN 61000-6-2:2005 and DIN EN 60335 according to the provisions of the Directives 2004/108/EG and 2006/95/EG Place and date of issue: Würzburg, 02-December-2013 Dipl.-Ing. Joachim Renschke Managing Director PRIOLITE GmbH PRIOLITE GmbH Wuerzburg - Last revised: 12/2013 - Page 12...
Page 3
Dear photographer, Thank you for selecting the PRIOLITE compact flash unit. As a young, aspiring company, PRIOLITE intends to use innovative technologies and high- quality products to open up new market segments for professional photography. Our devices are based on state-of-the-art technology and equipped with carefully selected components.
Page 4
For replacement pull the flash tube carefully out of the plug connector and replace it with a new one (to be ordered from PRIOLITE) by plugging the three contacts into the sockets. Before using the unit once again the glass dome is to be mounted for safety reasons.
Page 5
Compact flash units that are switched off are automatically discharged. It is also possible to reduce the energy quickly to the current value by triggering a test flash. PRIOLITE GmbH Wuerzburg - Last revised: 12/2013 - Page 10...
Page 6
Only the original PRIOLITE charger may be used for charging the batteries. Before each use, check to ensure that the casing as well as all cables, connectors and sockets are in good, undamaged condition. Otherwise operation of this device is forbidden;...
Page 7
Respiratory system: Ensure fresh air supply. If necessary, perform first aid measures. In any case, following first aid measures a doctor should be consulted. Lithium-ion batteries must be only recharged with the supplied PRIOLITE charger of the respective voltage class; use the 16V charger for MBX 500.
Page 8
Flash readiness is indicated by 1.) lighting up of the “TEST” button; 2.) green light of the plastic cap covering the photocell; 3.) re-lighting up of the modelling lamp when FC is activated; and 4.) an acoustic signal when the Audio function is switched on. PRIOLITE GmbH Wuerzburg - Last revised: 12/2013 - Page 9...
Page 9
With the battery drawer pulled out of the unit, under no circumstances reach into the opening of the compact flash device! An exchange drawer fitted with an original PRIOLITE battery of the same voltage class (MBX 500: 500V) is to be inserted completely into the opening of the flash unit with slight pressure until it clicks.
Page 10
(not included) through the opening of the handle and to secure it to a suitable lug on the suspension unit. PRIOLITE GmbH Wuerzburg - Last revised: 12/2013 - Page 5...
Page 11
Do not tilt the accessory during this process. Then return the lever to its initial position moving with the spring force to lock the accessory into place. PRIOLITE GmbH Wuerzburg - Last revised: 12/2013 - Page 6...
Page 12
Connection of softboxes The PRIOLITE softboxes have a speedring which is mounted to the flash unit the same way as reflectors (see description above). For softboxes of other brands adapters are available upon request. Please ask for details.
Need help?
Do you have a question about the MBX 500 HotSync and is the answer not in the manual?
Questions and answers