Subscribe to Our Youtube Channel
Summary of Contents for BDI Avion Noir 8537
- Page 1 HIGH PERFORMANCE FURNITURE FOR YOUR HOME THEATER Avion Noir 8537 & 8539 Assembly Instructions...
- Page 2 Step 1 Unpack and identify the parts listed above. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at: Velcro Strap x 5 customerservice@bdiusa.com All other concerns please contact your local BDI Retailer.
- Page 3 Step 3 Gromet x 2 Install handles (F) on doors and drawers using the nylon screw (G) using the Phillips screwdriver supplied. Phillips Screwdriver Detail: rear view of the door. Step 4 Install both sliding back panels (B) to the backside of the cabinet. NOTE: Velcro straps are included as wire management for your convenience.
- Page 4 Center channel speaker option B. If you decide to use your top/center drawer area for a center channel speaker, the glass drawer face may be replaced with speaker drawer face. In order to do this, follow the steps below. 1. Pull out drawer and locate all exposed Cam inserts. Cam inserts are located inside drawer and bottom side of drawer shelf.
- Page 5 Fine tuning your new BDI Avion Home Theater Furniture These steps are to be followed after you have unpackaged and completed the simple assembly instructions for your Avion or Avion Noir stand. Due to jostling in freight or perhaps an uneven floor, the doors and drawers on your Avion stand may not appear to be in perfect alignment.
Need help?
Do you have a question about the Avion Noir 8537 and is the answer not in the manual?
Questions and answers