General Specifications; No Sound - Sansonic FT-300A User Manual

<2

No Sound.

• Please check the AV cable is connected
• Try a new channel.
1). Maybe there is no sound for viewing
• Press "MUTE".
• Please check if your TV is on "MUTE" mode.
C3l
Remote control does not work.
• Check the batteries
@
The warning
• "No Signal".
Check the RF cable and antenna
Model
Description
RF IN
Video
IN/OUT
JACK
Audio
RF OUT
DCIN
ATSC Compatible
Audio Spec
Video Spec
Operating Temperature
Size
Weight
ATSC Converter Box
Maybe MUTE was set before .
are installed
message about the digital broadcast.
FT-300A
ATSC Coupon-Eligible
F-Type Jack for ATSC Antenna.
RCA Jack for Video output.
2 RCA Jack for Stereo Audio output.
F-type Jack for Modulated AV RF Out (NTSC CH3/4).
SV 1.4A.
Band Width: 6MHz.
Band: S4MHz-807MHz
CH 2 - 69.
Modulated
RF Sensitivity:
Level: 1.2Vrms (1 kHz).
SIN: >60dB.
Level: 1Vpp.
S' C - 3S' C
179(L) X 120(W) X 2S(H)mm.
850g
- 20 -
correctly .
program
properly.
setup.
Converter
Method: 8VSB.
-83 - -SdBm.
channels .
Box