Do you have a question about the BP333 Plus and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Better Packages BP333 Plus
Page 1
Model BP333 Plus Manual Tape Dispenser BP333 Plus OPERATING MANUAL ® (77(5 $&.$*(6 1& 4 Hershey Drive Ansonia, CT 06401 Web Site: www.betterpackages.com BP P/N: MAN-333-OPR File Name: BP333Plus-OPERATING MANUAL-17Jun2014.doc...
Page 2
Packages reserves the right to revise this publication and make changes from time to time, in its content. Better Packages ASSUMES NO LIABILITY WHAT SO EVER FOR ANY LOSSES OR DAMAGES INCURRED AS A RESULT OF INFORMATION CONTAINED IN THIS MANUAL Proprietary Notice This publication contains information proprietary and confidential to Better Packages.
Page 3
TABLE OF CONTENTS Safety Precautions ......Page 4 Technical Data ......Page 5 Unpacking Notes .
This machine is designed for sealing cartons with water activated tape. Any other use will void all warranties and any responsibility or liability of Better Packages, Inc. Read all Safety Precautions and Operating Instructions before using the machine.
TECHNICAL DATA Size: 19 ½”” L x 9 ½” ”W x 12 ½” ”H Water Bottle Capacity: 44 oz. Tape Width: 1 ½ ” to 3” Wide Maximum Roll Size: Up to 600 ft. of tape Up to 7 ¾ ” diameter roll Tape Lengths Dispensed: Up to 30”...
Page 6
UNPACKING After removing the machine from the carton, check the following items before storing the shipping carton. 1. Brush Tank and 2 Moistening Brushes. These are packed inside the rear of the machine. 2. Plastic Water Bottle. This is packed on the side of the dispenser. 3.
Page 7
OPERATING INSTRUCTIONS 1. If the upper tape plate has been dislodged in shipping, replace as follow: With the slot towards the front of the machine, slide under feed wheel shaft from rear until the cut-out portions are over the retaining “buttons”. Allow the plate to slide in place so that the front end of the plate is under the rod and the rear portion is under the “buttons”...
Page 8
ADJUSTMENTS For Tape Width The adjustable roll guides in the tape basket should be properly set for the width of tape being dispenses. The roll of tape should be centered between the frames by threading the tape loosely between the roll guides which engage in slots in the basket and roll guide separator.
Page 9
Spring Tension Adjustment Both operating springs can be seen by turning the Better Pack® 333 Plus upside down after first removing the water tank and bottle (see figure # 8). Figure # 8 A. The handle return spring (A) is the long spring terminating in a hook type clip positioned in one of three holes underneath the water tank platform.
Page 10
BP333 Feed Wheel / Blade Height Adjustment Purpose: This adjustment is to insure that the movable shear blade is raised out of the path of the tape before the feed wheels grip the tape to feed it forward. Additionally, the adjustment sets the gripping force between the upper and lower feed wheels so the tape does not slip.
Page 11
Crank Handle If desired, the crank handle can be reversed. Pressure Plate Weights (see figure # 10) The pressure plate, which rests on top of the brushes, has removable weights. The number of weights can be varied to suit the tape being dispensed. Heavy weight tapes require more weight inserts than lighter tapes.
Page 12
Thank you for your purchase and we know you will enjoy the performance of your new Better Pack® 333 Plus Dispenser. Please return your warranty card to: Better Packages, Inc. 4 Hershey Drive Ansonia, CT 06401...
Page 13
Better Packages, Inc. Shelton, CT at 800-237-9151 (US only) or (203) 926-3700. To locate your local Authorized Distributor/Service Center, visit www.betterpackages.com. Transportation charges on machines or parts returned to Better Packages for service must be prepaid by the customer. Customers will be responsible for freight expenses on parts or machines returned to them.
Need help?
Do you have a question about the BP333 Plus and is the answer not in the manual?
Questions and answers