Advertisement
Quick Links
Copyright © Next Level Security Systems, Inc. 2009-2010
NLSS DC-400 HD Media Decoder:
Quick Start Guide
The NLSS DC-400 HD Media Decoder is a 1080p HD device that can simultaneously
decode and display up to 4 HD or SD video streams from compatible IP cameras, video
streams, and local files. Also it is based on PSIA standards and RTSP, RTMP, and HTTP
protocols, and is thereby compatible with potentially numerous devices as well as Internet
resources.
This Quick Start Guide is for using the NLSS HD Media Decoder in Independent Mode,
without NLSS Gateways. In Independent Mode, you can plug the NLSS HD Media
Decoder directly into any HD 1080p display via HDMI inputs; configure the NLSS HD
Media Decoder via a PC browser; and operate the NLSS HD Media Decoder from the
same browser or a remote control.
PACKING LIST
The following items come with your NLSS HD Media Decoder:
•
DC-400 Decoder
•
Power supply
•
Stand and monitor mount
•
Utility CD
•
NLSS DC-400 HD Media Decoder: Quick Start Guide (this document)
FCC STATEMENT
This device complies with Part 15 of the Federal Communications Commission (FCC)
Rules. Operation is subject to the following two conditions:
•
This device may not cause harmful inference, and
•
This device must accept any interference received including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer's instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in
DC-20101129
1
Advertisement
Summary of Contents for NLSS DC-400 HD
-
Page 1: Quick Start Guide
NLSS DC-400 HD Media Decoder: Quick Start Guide The NLSS DC-400 HD Media Decoder is a 1080p HD device that can simultaneously decode and display up to 4 HD or SD video streams from compatible IP cameras, video streams, and local files. Also it is based on PSIA standards and RTSP, RTMP, and HTTP protocols, and is thereby compatible with potentially numerous devices as well as Internet resources. -
Page 2: Safety Instructions
NLSS DC-400 HD Media Decoder Quick Start Guide DC-20101129 a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •... - Page 3 IP cameras and a PC. 4. Plug the power cord of the NLSS HD Media Decoder into an AC outlet, and turn it on. 5. Insert the supplied NLSS Discovery Utility CD into the disc drive of a PC on the same LAN as the decoder.
-
Page 4: Basic Operation
There are several was to display cameras on the monitor attached to your NLSS HD Media Decoder. Perhaps the simplest way is to display one camera at a time by displaying the Channel assigned to each camera, as follows: 1.