Subscribe to Our Youtube Channel
Summary of Contents for bednest cot
- Page 1 The bednest is the world’s first truly multi-function cot that allows ‘along-side sleeping’. We call this ‘bednesting’ for you and your baby. Please read this user guide carefully and retain for future reference.
- Page 2 Being quick and simple to set-up, the bednest also makes an ideal travel cot, giving your baby the reassurance of sleeping in the same familiar environment for about the first months six of his or her life, so promoting restful sleep for all the family.
- Page 3 Do not use the bednest if any parts are missing or broken. The bednest is recommended for your baby only until he or she is able to sit-up unaided. When your baby is able to kneel or pull him or her-self up, the bednest should no longer be used.
- Page 4 How to use the bednest The bednest’s unique design allows it to be used in various ways to suit your lifestyle. • As a 4-sided bednest using the stand • As a 4-sided bednest independent of its stand, acting as a Moses Basket around the house.
- Page 5 step Holding the middle carry-handle, remove the stand from the box, and place it flat on the floor. Remove the packaging from the ends. The adjustable sliding catches should be facing up. Adjustable sliding catches...
- Page 6 Flip up the adjustable sliding catches Minimum and grasp the middle carry-handle. height Lift the stand to the desired height, label ensuring that both adjustable sliding catches are then secured beyond the minimum level as marked by the step label.
- Page 7 Remove the bednest crib from the box and remove the packaging from the ends. Lift the wooden ends until vertical (you will hear them click when securely in place).
- Page 8 Lift the side panels until vertical and let them drop down into their retaining slots (they should now remain free-standing). step...
- Page 9 step Clip each of the four corner tabs to the securing ‘eyes’ on the wooden ends.
- Page 10 It is normal to notice a smell that remains from this process when first removing the plastic wrapping from the mattress.
- Page 11 Set the height of the stand to be 3 to 5cm (1 or 2 inches) below the top of your own mattress. Adjust the straps so there is no slack, but do not overtighten, as this could cause the bednest to tilt. The bednest stand is now firmly held to the side of your bed.
- Page 12 Wrap the long strap around the base of your bed, underneath the mattress, so that the ‘D’ ring is at the side of the bed where you wish to attach the bednest. Take the short strap and unthread it from its clip. Put the short strap through the ‘D’ ring and re-thread its clip, taking care to thread correctly so that it can be tensioned.
- Page 13 Place you baby in the bednest. Only when you are in your bed should the folding side panel be folded down fully, to create a safe, extended sleeping surface.
- Page 14 Fully unzip the carry bag and lay it out flat on the floor. Place the folded stand on one half of the carry bag, with the adjustable sliding catches facing up, then re-attach the folded bednest crib on top, taking care to locate the metal pins under the crib into the corresponding holes in the...
- Page 15 Please follow the guidance on the care label. We hope the bednest will become a much loved part of your family, and should you pass on your bednest to friends and family to use after you, don’t forget that they can order new mattresses and side panels via www.bednest.com.
- Page 16 UK’s largest parenting charity, supports the introduction of the bednest crib that enables a positive experience for parent and child. www.bednest.com ‘bednest two’ is designed and marketed by Bednest Ltd Clouds Hill, Verriotts Lane, Morcombelake, Bridport, Dorset DT6 6DU Registered Number: 5322058...
Need help?
Do you have a question about the cot and is the answer not in the manual?
Questions and answers