Indicator Lamp Identification; Technical - Swann SWKA4200 Use And Care Manual

INDICATOR LAMP IDENTIFICATION

The indicator light flashes red (every four seconds)
When the lid opens, the indicator light shows green.
When the lid closes, the indicator light shows red
Sensing mode / Standby state.
Red light flashes once every 4 seconds.
CAUTION
1. Do not apply any external power to the cover when it is in use.
2. ONLY Use type AA batteries
3. Do Not use water to rinse bin cover or battery compartment. You can wipe with
damp cleaning cloth when the power is off.
4. Avoid using the bin in a moist or steamy environment.
5. Keep the inductive window away from direct sunlight or lamplight.
6. Do not place the bin close to high frequency electronic products, i.e.: microwave
ovens, energy saving lamps, or remote controls, etc.
7. Avoid placing the bin in a contained space and ensure that any obstacles don't
block the inductive window within a 2 metre distance.
8. Do not use harsh abrasive detergents or scouring pads to clean the main
stainless steel body.

TECHNICAL

Rated voltage: DC 6 Volts
4
Sensor Bins_UG.indd 4
HOW TO USE
12/08/2015 08:08