Advertisement
Quick Links
B2T
2 x Allen Keys
0 x
10 x
20mm
Wooden
Connecting
dowels
bolts
B
C
Re-Use 6 x from
cot assembly
10 new dowels
supplied in case
18 left over
of damage from
from cot assembly
cot assembly
NOTE: Parts listed below were used in cot assembly
1 x Fixed side = bed head
1 x Single bed foot
*IMPORTANT– RETAIN FOR FUTURE REFERENCE*
PLEASE READ CAREFULLY
Kingparrot Products
AUSTRALIA
27-37 Vallance Street
St Marys NSW
2760 Australia
Ph: 02 9833 3769 Fax: 02 9673 4240
Baby To Teen Cot / Single Bed
Single Bed Hardware and parts list
4 x
28mm
Connecting
bolts
D
Re-Use 4 x from
cot assembly
2 x Single bed base
1 x Base
2 x Base side supports
2 x
Capping
Connecting
nuts
L
G
Re-Use 9 x from
cot assembly
from cot assembly
NOTE: End panels of cot will become
the main base of your single bed.
Lay both panels flat on the floor.
NOTE: Pelmet is to be positioned with
the curve going to the back of the
bed head.
1 x Single bed head pelmet
2 x Single bed head sides
4 x Single
bed feet
UNITED KINGDOM
Westfield, East Garston
Hungerford
RG17 7HD
UK
Ph: 44 14 8864 9663 Fax: 44 14 8864 8869
0 x
54mm
Connecting
bolts
I
1 left over
Re-Use 6 x from
cot assembly
2 left over
1 x Bed foot support rail
4 x Single bed feet
0 x
70mm
bolts
V 07/06
Advertisement
Related Manuals for kingparrot b2t
Summary of Contents for kingparrot b2t
- Page 1 *IMPORTANT– RETAIN FOR FUTURE REFERENCE* PLEASE READ CAREFULLY Kingparrot Products AUSTRALIA UNITED KINGDOM 27-37 Vallance Street Westfield, East Garston St Marys NSW Hungerford 2760 Australia RG17 7HD Ph: 02 9833 3769 Fax: 02 9673 4240 Ph: 44 14 8864 9663 Fax: 44 14 8864 8869...
- Page 2 Baby To Teen Cot / Single Bed from newborn to teenager Maintenance of your Kingparrot Cot & Furniture • TO ENSURE THE SAFETY OF YOUR COT OR BED, REGULARLY CHECK ALL THE CONNECTING BOLTS AND GLIDE PINS MAKING SURE THEY ARE TIGHT, CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE •...
- Page 3 B2T Single Bed assembly instructions PLEASE NOTE: Before building your B2T single bed you must disassemble the cot fully, including all capping screws and base. Please re identify all parts including screws. Due to the weight of this product assembly requires 2 people.
- Page 4 2 x L capping screw together nuts. using 2 x I bolts. B2T single bed NOTE: The B2T single bed has been manufactured for use with a standard single bed size mattress which measures 920mm wide x 1880mm long. Fill 4 remaining holes in bed base using 4 x C bolts.
Need help?
Do you have a question about the b2t and is the answer not in the manual?
Questions and answers