Download Print this page

alsident system 75 Use And Maintenance Manual

Download this manual

Manual

Use and Maintenance

ALSIDENT ® SYSTEM 75

Need help?

Do you have a question about the system 75 and is the answer not in the manual?

Page 1 Manual Use and Maintenance ALSIDENT ® SYSTEM 75...
Page 2: Use And Maintenance
Hoods: The hoods for system 75 are available in two material versions. The majority of hoods are made of transparent PETG (Polyethylene Terephthalate, Glycol-modified). In addition, there are three types in anodized aluminium: suction pen, suction nozzle and 200 mm hood. The hood is also available in a powder-coated version.
Page 3 Cleaning of the A-pipe is recommended at least once every quarter or every six months. O-rings: The O-rings for system 75 are made of white polyethylene (PE). It is very important to avoid greas- ing of the O-ring with oils or fats reducing friction between the rings and the joints. Otherwise the arm cannot keep its work position.
Page 4 Since the resistance of 1 MΩ is very important in ESD-areas, please be careful not to break the resistance. ALSIDENT SYSTEM A/S Finlandsvej 10 · DK-8450 Hammel · CVR nr. 57867612 · Tlf.: +45 86 96 50 00 · Fax: +45 86 96 50 10...
Page 5 This position generally causes a lower efficiency. Ill. 03 We refer to our capture efficiency report on the Alsident® System reserve the right to make various systems, which is available on demand. changes in this brochure to technical data, construction,...