Front Panel Controls And Indicators - ViewSonic VG2030m-1 Service Manual

16. 1024 x 768 @ 75Hz, 60.0kHz
17. 1280 x 1024 @ 60Hz, 63.4kHz
18. 1280 x 1024 @ 75Hz, 79.97kHz
19. 1400x 1050 @ 60Hz, 65.3kHz
Primary Presets
"1400 x 1050" @ 60Hz
User Presets
Number of User Presets (recognized timings) Available: 10 presets total in FIFO configuration
Changing Modes
● Maximum Mode Change Blank Time for image stability : 3 seconds (Max), excluding "Auto Adjust" time
● Under DOS mode (640 x 350, 720 x 400 & 640 x 400), it should recall factory setting when execute "Auto Adjust"
● The monitor needs to do "Auto Adjust" the first time a new mode is detected
(see section "0-Touch™ Function Actions")
● While running Change Mode, Auto Adjust or Memory Recall, the image shall blank

2.6 FRONT PANEL CONTROLS AND INDICATORS

Front Panel Hardware Controls
Power Switch (Front Head)
Power LED (Front Head)
Front Panel Controls (Head)
[ X] [ 1 ] [▲] [▼] [ 2 ] [ ]
Reaction Time
Short Cuts Function from the button(s)
[1]
[2]
[▼]
[▲]
[▼]+ [▲]
[1]+[2]
[1] + [▼]
[1] + [▲]
Remark : All the short cuts function are only available while OSD off
ViewSonic Corporation
Power Control, soft Power Switch.
Green – ON
Orange – Active Off
Dark = Soft Power Switch OFF
[ ] Power
[ X]Audio mute on/off
[ 1 ] BUTTON 1
[▲] UP ARROW BUTTON
[▼] DOWN ARROW BUTTON
[ 2 ] Button 2
Note: Power Button, Button 1, Button 2, and Mute Button must be
one-shot logic operation.
OSD must fully appear within 0.5s after pushing Button 1
Main Menu
Input selection
Brightness adjust
Contrast adjust
recall both of Contrast and Brightness to default
Toggle 720x400 and 640x400 mode when input 720x400 or 640x400
Power Lock
OSD Lock
7
Yes
Yes
Yes
Yes
Confidential - Do Not Copy
Yes
Yes
Yes
Yes
VG2030m-1