Advertisement
Quick Links
Potter Electric Signal Company
Potter Electric Signal Company
2081 Craig Road, St. Louis, Mo 63146
2081 Craig Road, St. Louis, Mo 63146
Phone (800) 325-3936, Fax (314) 878-7264
Phone (800) 325-3936,
Fax (314) 878-7264
VDP-100
Video-Eye People Counter
Instruction Manual and User's Guide
TM
Potter Electric Signal Company
Potter Electric Signal Company
2081 Craig Road, St. Louis, Mo 63146
2081 Craig Road, St. Louis, Mo 63146
Phone (800) 325-3936, Fax (314) 878-7264
Phone (800) 325-3936,
Fax (314) 878-7264
Advertisement
Summary of Contents for Amseco VDP-100
- Page 1 VDP-100 Video-Eye People Counter Instruction Manual and User's Guide Potter Electric Signal Company Potter Electric Signal Company Potter Electric Signal Company Potter Electric Signal Company 2081 Craig Road, St. Louis, Mo 63146 2081 Craig Road, St. Louis, Mo 63146 2081 Craig Road, St. Louis, Mo 63146 2081 Craig Road, St.
-
Page 2: Specifications
Output 12V AC Thank you for purchasing AMSECO VDP-100 Video-Eye People Counter . Please read this manual thoroughly before making connections and operating the unit. Following the instructions in this manual will enable you to obtain optimum performance from the system. -
Page 3: Troubleshooting
Make sure your power source is 120V AC 60Hz. You can also use the VDP-100 as a monitoring camera by simply connecting its video output to any NTSC monitor. Condition: Counter is ON but the status LED of the Video Sensor Unit is off. - Page 4 Blinks upon ENTRY / EXIT events DOWN 2) USE only AMSECO 12V AC transformer provided together and wires as specified in this Instructions. 6) Camera Lens 3) For the maximum accuracy of the counter it is strongly recommended that you install the system in the environment satisfying the following conditions: 7.
-
Page 5: Installation Procedures
Step 3) Make sure people will cross at least 2/3 of the detection area when they enter. Step 4) Make sure that the detection area is not crossing the door or the wall. Move the VDP-100 if To AC Outlet necessary. - Page 6 3) Installation of the Counter Display Unit WARNING: VDP-100 SHOWS ITS BEST PERFORMANCE WHEN THE VIDEO SENSOR UNIT IS INSTALLED IN PARALLEL WITH THE FLOOR SO THAT THE CAMERA HAS A BIRDS-EYE Step 1) Decide a place to install the Counter Display within the reach of a Power Source.
- Page 7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AMSECO VDP-100-C...
Need help?
Do you have a question about the VDP-100 and is the answer not in the manual?
Questions and answers