Related Manuals for Audiovox PRESTIGE PMC-50
Summary of Contents for Audiovox PRESTIGE PMC-50
- Page 1 PMC-50 FM MODULATOR / WIRED COMMANDER FOR CD CHANGER SYSTEMS P-14R WIRELESS REMOTE CONTROL (Optional) AUDIOVOX OWNER'S OWNER'S OWNER'S OWNER'S OWNER'S MANUAL MANUAL MANUAL MANUAL MANUAL...
-
Page 2: Table Of Contents
INDEX OPERATING INSTRUCTIONS...2 WIRED COMMANDER OPERATION ...3-4 DISC ID FEATURE ...5-6 CD CHANGER ERROR CODES ...6 WIRELESS REMOTE CONTROL ...7-8 SETTING THE FM MODULATOR OUTPUT FREQUENCY ...9 SYSTEM RESET ...9 TROUBLESHOOTING ...10 WARRANTY ...BACK COVER... -
Page 3: Operating Instructions
The PMC-50 FM Modulator/Wired Commander is designed to permit operation of compatible Prestige CD changers through the FM section of any car stereo system. Please check with your Prestige car stereo specialist for recommendations of the CD changer models that will work with the PMC-50. The specific details on the handling of discs and the use of the CD magazine (loading, removal, etc.) will be found within the Owner’s Manual of... -
Page 4: Wired Commander Operation
WIRED COMMANDER OPERATION LIQUID CRYSTAL DISPLAY PANEL The Liquid Crystal Display (LCD) panel will illuminate when the CD changer is operating. The disc number, track number and elapsed time or Disc ID name (if programmed) will appear as well as the function in use as explained in the applicable function description in this section. - Page 5 “SHF” indication will appear on the display panel in addition to “RPT” and play of the selected disc will continue but the tracks on the disc will be played in a random, shuffled order instead of the normal progres- sion. Press the Shuffle button again to cancel Shuffle mode but remain in Disc Repeat mode, or press the Repeat button to cancel Disc Repeat mode but remain in Shuffle mode.
-
Page 6: Disc Id Feature
DISC ID FEATURE When connected to a compatible CD changer, the Disc ID feature incorporated in this unit allows you to program an identifying name of up to 8 characters for up to 110 different discs. The Disc ID may be the disc name, artist’s name, music type, or anything else of your choosing. -
Page 7: Cd Changer Error Codes
tion by pressing and holding the button for longer than 4 seconds. 2. If you attempt to program more than 110 Disc ID’s, the display panel will indicate “**FULL**” and you will need to delete an existing Disc ID to make room for a new one. To do this, first press and hold the Display Call button the programming mode. -
Page 8: Wireless Remote Control
WIRELESS REMOTE CONTROL DISC TRACK BATTERY COMPARTMENT The P-14R Wireless Remote Control (optional) is capable of operating all functions of the wired commander except for the Display Call. Each button on the remote control functions in the same way as the comparable button on the wired commander. For optimal operation of the remote control, always aim it toward the Remote Sensor PLAY / PAUSE (... - Page 9 TRACK/DISC SHUFFLE (SHF) See wired Commander TRACK/DISC (SCN) See wired Commander INFRARED SENDER The wireless signal from the remote control is sent from this lens. For optimal range and performance of the remote control, always aim the Sender at the Remote Sensor mander.
-
Page 10: Setting The Fm Modulator Output Frequency
SETTING THE FM MODULATOR OUTPUT FREQUENCY The PMC-50 modulator is supplied from the factory pre-set with an output frequency of 88.3 MHz., so this is the frequency on your FM radio to which you would tune during CD changer operation. In some areas however, there may be a strong local FM station broadcasting on 88.3 MHz. -
Page 11: Troubleshooting
TROUBLESHOOTING An error made in operation or during installation of this product may be mistaken for a system malfunction. Please perform the checks described below before contacting your dealer or service facility. Symptom Possible Cause Blown fuse No power Incorrect connection Magazine cannot be Magazine is inserted in wrong installed... -
Page 12: Month Limited Warranty
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.