Before Calling The Service - AEG S7401CMX2 User Manual

PART- 6.

BEFORE CALLING THE SERVICE

Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Cooler Indicators.
ERROR TYPE ERROR TYPE
SR
Freezer comp.
LF
Not Cold enough
Ref rigerator
LC
Not Cold enough
not cold enough
LF and LC
Ref rigerator
HC
comp. too Cold
Low voltage
LOPO
There is/are some part(s)
Failure
Out of order or there is a
Warning
f ailure in cooling process
This caution w ill be seen
especially af ter long term of
pow er failure
Ideal temperature for Ref.
Compartment is +4
comp.
see this w arning your foods
have risk of spoiling.
It is the combination of LF
Warning and LC Error type
The foods starts to f reeze
because of the too much
cold temperature
When the pow er supply gets
low er than 170 V the
Warning appliance gets to steady
position.
WHY
Call Service for assistance as
soon as possible.
1. Do not f reeze the foods that are
thaw and use in short time period.
2. Set the freezer temperature to
colder values or set the super
f reeze , until the compartment gets
to normal temperature.
3. Do not put f resh f ood until this
f ailure is off .
1. Set the refrigerator temperature
to colder values or set the super
o C. If you cooling mode until the compartment
gets to normal temperature.
2. Do not open the door much until
this failure is of f
You w ill see this failure w hen first
starting the appliance. It w ill be of f
af ter the compartments gets
normal temperature
1. Check if the "Super cooling
mode" is on
2. Decrease the ref rigerator
temperature values
This not a failure. This prevents
any damages on the compressor.
This w arning w ill off af ter the
voltage gets required level
EN - 30 -
WHAT TO DO