Advertisement
Available languages
Available languages
Activating the alarm and hourly chime
•
With the watch in time display mode, press MODE the required
number of times to reach the alarm settings. Press start/stop
once. The alarm symbol will be displayed.
•
Press start/stop the required amount of times to either activate
the hourly chime or alarm and the hourly chime combined.
Combining the alarm and hourly chime
•
Alarm only (alarm symbol displayed).
•
Hourly chime only (chime symbol displayed)
•
Both alarm and hourly chime (both symbols displayed)
Stopwatch
Without split-time
1. Press MODE the required number of times to
reach the stopwatch mode.
2. Press start/stop to start
the stopwatch.
3. Stop the stopwatch by pressing start/stop again.
4. Press RESET to reset the stopwatch back to zero.
With split-time
1. Press MODE the required number of times to
reach the stopwatch mode.
2. Press start/stop to start
the stopwatch.
3. Press RESET to display split-time. "SPL" is
displayed. The stopwatch will not be visible
but will continue running in the background.
4. Press RESET to view the running stopwatch
display.
5. Steps 3 and 4 can be repeated as many times as you like.
6. Press start/stop to stop the stopwatch.
7. Press RESET to reset the stopwatch back to zero.
Countdown timer
•
When the watch has counted down to zero an alarm will sound.
Turn it off by pressing any button. Otherwise the alarm will
continue to sound for about 60 seconds.
•
The timer can be set for up to 60 minutes.
Setting the countdown timer
1. Press MODE the required number of times
to reach countdown timer mode. "TR" will
be displayed.
2. Press RESET for the minutes display.
Once it starts flashing you can enter your
desired settings.
3. Press start/stop to incrementally increase
the digits. Hold the button in to increase
the digits quickly.
GREAT BRITAIN • CUSTOMER SERVICE tel: 0845 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
4. Press MODE to reach to the next setting.
5. Press start/stop to incrementally increase
the digits. Hold the button in to increase
the digits quickly.
6. Push RESET once you have completed
inputting your settings.
Using the countdown timer
1. Set the countdown timer according to the instructions above.
2. Press start/stop to start the countdown timer.
3. Press start/stop again if you wish to pause the countdown.
Dual time zones
Setting time zone 2
1. Press MODE the required number of times
to reach the time zone 2 setting. "T2" will
be displayed.
2. Press RESET for the hours display.
Once it starts flashing you may input
the desired setting.
3. Press start/stop to incrementally increase
the digits. Hold the button in to increase
the digits quickly.
4. Press MODE to set the minutes.
5. Press start/stop to change the minutes.
Pressing once changes the setting in
30 minute increments.
6. Push RESET once you have completed
inputting your settings.
Backlight
•
The backlight provides illumination which
makes the digits easier to read in darkness.
•
The backlight can be turned on by pushing
the backlight button. The backlight will be lit
for about 4 seconds.
Care and maintenance
•
Never try to open the casing.
•
Do not press the buttons when the watch is under water.
•
If there is any moisture inside the watch contact our customer
service department immediately. Moisture inside the watch
could cause damage to the metal parts.
•
The watch can withstand some rough treatment, but do not
expose it to unnecessary blows.
•
Do not expose the watch to extreme temperatures.
•
Clean the watch using a dry, soft cloth. Avoid strong detergents
since they can damage the plastic parts of the watch.
•
Avoid wearing the watch in the vicinity of strong electromagnetic
fields.
Disposal
Follow local ordinances when disposing of this product. If you are unsure
of how to dispose of this product, please contact your municipality.
Specifications
Diameter
46 mm
Battery size
CR2025 (included)
Water resistant
10 ATM
20140306
Advertisement
