Summary of Contents for Wisperkool 20 ton
- Page 1 Portable Vertical Air-Conditioning and Heating Systems Installation and Service Manual for 20 Ton Units 82” 81” Front Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016...
- Page 2 FAILURE TO FOLLOW STATE AND LOCAL CODES COULD RESULT IN DEATH OR SERIOUS INJURY. All vertical HVAC units should be installed per the National Electric Code(NEC) and/or applicable state and local codes. Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016...
-
Page 3: General Unit Information
Evaporator Coil Face Area 12.5 sq.ft. Rows Condenser Coil Face Area 21 sq. ft. Type Disposable Filter Quantity Dimensions 24in. x 24 in. x 2 in. Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016... -
Page 4: Weights And Dimensions
2544 Fork Pocket Dimensions 8” 3” Note: Add 17 inches to the unit width and 50 lbs to the unit weight for condenser discharge duct connections. Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016... - Page 5 Use a forklift of suitable capacity to move the unit. Failure to properly lift unit could result in death or serious injury or possible equipment or property damage. Fork Lift Pockets Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016...
-
Page 6: Electrical Information
Condenser Blower Motor 2 hp Condenser Blower R:A (each) 6.5 amps Heater kW (total) Heater Amperage (total) 56.5 Heater kW each stage 15kW and 30kW Heater Stages Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016... -
Page 7: Line Drawings
Front Side Condenser Coil 82” 82” 82” Compressor and electrical access panel 44” 81” Side Back 81” 44” Front with Duct Kit Side with Duct Kit Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016... - Page 8 DO NOT OVER TORQUE THE TENT CLAMP BOLTS This could permanently damage the tent clamps rendering them ineffective. Clamps would need to be replaced. The warranty would not cover this. Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016...
-
Page 9: Start-Up Guidelines
9. Turn the black power handle to the “OFF” position. * If the screen shows RED then switch the positions of the two left side power cords. Proper power cable hook- up for 230v/3/60 units Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016... - Page 10 Check filters periodically to verify that the filters are clean. Dirty filters will severely reduce the performance of the machine. Motor Mount Bolt 3/4 in. adjusting bolt Filters are behind the return air grille Custom HVAC & Filtration 726 Seneca Place Madison, WI 53711 608-334-5999 jeff@wisperkool.com Jan 2016...
Need help?
Do you have a question about the 20 ton and is the answer not in the manual?
Questions and answers