Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RidgeWave BEC 6900
Summary of Contents for RidgeWave BEC 6900
- Page 1 Quick Start Guide BEC 6900 4G/LTE Outdoor Router...
- Page 3 RidgeWave 6900 4G/LTE Outdoor Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL.
- Page 4 Quick Start Guide Hardware Overview 1 2 3 CONNECTORS DESCRIPTION Insert the SIM card into the SIM slot. SIM / LED / Reset Press the reset button to reset device or restore to factory default settings Gigabit LAN(PoE) Connect it with the supplied PoE injector, 802.1at compliant, using an Ethernet cable. LED Description: STATUS DESCRIPTION...
- Page 5 RidgeWave 6900 4G/LTE Outdoor Router Mounting Kit Installation Attach the Articulation Pole to the Enclosure 1. Attach the articulation pole to the back of the RidgeWave 6900 using M6*16 screws and washers. A -45 or +45 degree adjustment Dual-Polarized Antenna...
- Page 6 Fix the T-formed Bracket to the pole by using the stainless hose clamp. Mounting the RidgeWave 6900 to the T-formed Bracket Attach the articulation pole (the RidgeWave 6900 enclosure) to the T-formed bracket by using M8x40 bolts, nut, spring washer and washer.
- Page 7 RidgeWave 6900 4G/LTE Outdoor Router Dual-Polarized Antenna – From the nominal position, adjusting and rotating the RidgeWave 6900 in -45 or +45, anticlockwise or clockwise, degree angle. Position Adjustment Find the location and best angle for getting the strongest signal from the base station. The RidgeWave 6900 must be directed towards the nearest base station.
- Page 8 Quick Start Guide Grounding the RidgeWave 6900 to Complete the Installation Attach the grounding wire to the RidgeWave 6900 and tighten the screw...
- Page 9 RidgeWave 6900 4G/LTE Outdoor Router Router Installation Instructions 1. Power on your RidgeWave 6900 Step 1: Assemble M25 cable gland Step 2: Unscrew the LAN (PoE) port and insert the supplied outdoor Ethernet cable (RJ-45) through material A-D, and then connect the RJ-45 Ethernet cable into the LAN (PoE) port.
- Page 10 Quick Start Guide 2. Set up your 4G/LTE Internet Connection Step 1: Unscrew the cap of SIM card slot. Step 2: Slide the SIM card with the mental contacts (gold plate) facing down to the SIM slot then push it all the way in until you hear the clicking sound. It is recommended to use an Industrial Grade SIM card.
- Page 11 RidgeWave 6900 4G/LTE Outdoor Router Step 3: Screw the cap back tightly. Please power off the device before inserting or removing the SIM card. Warning...
- Page 12 Quick Start Guide Step 4: Login to your RidgeWave 6900 LTE The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the attached PC to this router is in the same subnet and has an IP address in the range between 192.168.1.1 ~ 192.168.1.253.
- Page 13 RidgeWave 6900 4G/LTE Outdoor Router Troubleshooting 1. None of the LEDs are on when you turn on the Router. Check the connection between the adapter and the router. If the error persists, you may have a hardware problem. In this case you should contact technical support.