Table of Contents
Advertisement
b.) Adjusting the sub-chassis drive:
The sub-chassis is already preset in the way that there is
a constant distance of approx. 5 mm between the
underside of the platter and the underside of the tone
arm socket.
This distance has the purpose to allow the sub-chassis
to freely oscillate in all directions.
The installation of our suspension bolts permits the sub-
chassis to only oscillate vertically in a limited and
controlled way (see fig. F 6 with bottom tray).
F 6 - Drive setting
Sub-chassis
Tradition verpflichtet
9
Advertisement
Table of Contents
