Table of Contents
Advertisement
b.
10.
Insert a new memory module:
CAUTION:
only. Do not touch the components on the memory module.
a.
b.
c.
Downloaded from LpManual.com Manuals
Grasp the edge of the memory module (2), and then gently pull the memory module out of
the memory module slot.
CAUTION:
To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
To prevent damage to the memory module, hold the memory module by the edges
Align the notched edge (1) of the memory module with the tab in the memory module slot.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
Gently press the memory module (3) down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
CAUTION:
To prevent damage to the memory module, be sure that you do not bend the
memory module.
Adding or replacing memory modules
33
Advertisement
Table of Contents
