1. Manuals
  2. Brands
  3. AIS Manuals
  4. DVR
  5. DIAI3XX
  6. User manual

AIS DIAI3XX User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Users Guide
Printed for Reference Only on November 15, 2006

DVR User's Guide

Page 1 of 127
Version ID: 2.60.01
Date: May/20/2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIAI3XX and is the answer not in the manual?

Questions and answers

Related Manuals for AIS DIAI3XX

Summary of Contents for AIS DIAI3XX

  • Page 1: Dvr User's Guide

    DVR User’s Guide Version ID: 2.60.01 Date: May/20/2006 Users Guide Page 1 of 127 Printed for Reference Only on November 15, 2006...

  • Page 2: Table Of Contents

    Table of Contents DVR User’s Guide..............................1 1. Introduction................................ 4 1.1. Overview ................................ 4 1.2. Main Features..............................4 1.3. Warning................................. 5 2. Start System............................... 6 2.1. Before Starting System ..........................6 2.2. File System Setup ............................6 2.3. Start System ............................... 12 3.
  • Page 3 7.8. Backup Viewer............................90 8. POS (Options) ..............................91 8.1. Setting (Single Serial CR).......................... 91 8.2. Setting (Multi Serial CR) ..........................92 8.3. Setting (Multi TCP CR)..........................93 8.4. Font Setup..............................94 8.5. Action Code Setup............................95 8.6. Transaction Search ............................ 96 9.

  • Page 4: Introduction

    1. Introduction 1.1. Overview DVR is the state-of–the-art Digital Video Recording System. This system is PC based system and can be operated at Windows systems (Windows 98 SE, ME, Windows XP and Windows 2000). It has Real time or High speed monitoring features, digital recording and play back features and Remote Access features. 1.2.

  • Page 5: Warning

    Live View Shutdown Shut down the live screen, while all the cameras continue to record. Networking Support You can remotely connect to the server through multiple network configurations, including LAN/WAN/ISDN or PSTN. You can also manually configure the ports of each DVR, which allows you to utilize a single high- speed connection to address multiple DVRs from a remote site.

  • Page 6: Start System

    2. Start System 2.1. Before Starting System User installed DVR through DVR Installation Guide. At first, User must setup the file system. After user finishes setting up the Database system, User can start the MAIN system. 2.2. File System Setup User can start the “File Manager”...
  • Page 7 2.2.2. Make Database After logon the file system, the first window screen is as follows; 1) Click “Add” button to add baskets at first Database Name : Enter the name of Database, this name will be used as the system’s Database name.
  • Page 8 When user selects a hard disk drive, File System Utility will ask the rate of space usage for specified hard disk drive. User can select from 0% to 100% of a hard disk drive. After selecting the rate, Click “OK” button. When the File System finished the Database setup, this utility will show the following screen.
  • Page 9 This example uses hard disk drive D 100%( “Require Space) of disk space will be used. The name of Database in this example is “DVRDB”. This example has 16 cameras. In this example, the total size of Database is 103,499 MB. 2) Click “Modify”...
  • Page 10 3) Click “Delete” button to delete all baskets in Disks Users Guide Page 10 of 127 Printed for Reference Only on November 15, 2006...
  • Page 11 If you click “Yes” button, all baskets will be deleted in disks Note : Data Base ( DB) Recovery The system was designed to recover the related Recording data automatically when the recording data would have a problem by abnormal operation or system shut down by interruption of electric power. When the system is rebooting, the system will check the status of the DB and recover the recording data (DB).

  • Page 12: Start System

    Automatically fix file system errors : If you tick this box, the system will do DB recovery automatically when system is rebooting. Scan for all data and recovery of bad baskets : If you tick this box, the system will do DB recovery for full file systems ( DB).
  • Page 13 2) Camera Box : The Camera Box is at the bottom. User can see the status of each camera that is installed. The Green box means camera only capture the current (real-time) image. The Red box means that image from the specified camera is recording. The White box means that no camera installed.
  • Page 14 : When user clicks this button, Color Setting Window will be displayed and User can adjust the display camera colors. : When user clicks this button, Search program will be running and display the Playback screen. : When user clicks this button, System Setting Window will be displayed and User can configure the system settings.
  • Page 15 Click these buttons. : Relay Off : Relay On When user clicks this button, One channel Search program will be running. You can play-back 1ch on the viewer while you are monitoring the live display. Search Button : If you click this button, below box will be displayed.

  • Page 16: Printed For Reference Only On November

    If there are no image recorded, it will be displayed this message box. :.If you click this button, you can’t control any of the button on the DVR viewer. : If you want to control any of the button, click this button. : If you click this button, DVR will record all of camera image normally.
  • Page 17 right left right left Auto Pan : Turn only pan about 360 degree.(left Auto Scan : Auto patrol with 9 presets(1 Preset : If you click this area, you can see this box. * Note 1. Preset - No. : Number of the Preset position(1~64). - Location : Specify the location for the number of the preset position.
  • Page 18 2-1 How to setup Tour 1). Click program cell for you want tour number and type in preset position numbers in the order. 2). Click “Save” button. e.g. 23,44,12,25,16,5,38 : 23à44à12à25à16à5à38à23à44à12… 2-2. How to do Touring Just click the button of “ Run” then, the PTZ camera will start “touring”. If click the button again, PTZ camera will stop “touring”.
  • Page 19 4-3. select ‘save’. 4-4. Click “A/P” for auto-pan. 7) Free arrangement for display on the viewer : If you want to arrange freely the display screen, please catch up the desired camera by click the left button of your mouse on the camera screen and draw to other camera screen. Then the each camera screen would be re-arranged.

  • Page 20: System Setting

    3. System Setting 3.1. Start System Setting To start Setting menu, Click SETTING button from the Action Buttons. (Exterior Setup : You can execute via shortcut on the desktop or Start->Programs->DVR->Main- >Environment Setup) 1) Logon : To modify the System Configuration, User must have proper accessibility. Enter LOGON ID and password.

  • Page 21: System Setting

    3.2. System Setting Click “System”, the detailed system setting menu will be displayed. 1) Start Screen : User can choose seven modes. 1 Split : Default Screen will display the image only from one camera. 4 Split : Default Screen will display 4 different image from 4 different cameras. 6 Split : Default Screen will display 6 different image from 6 different cameras.
  • Page 22 2) Video Type : User can choose two types. NTSC 3) Display Border : This shows a white line between cameras. 4) CCTV Interval : Display switching time for Composite TV screen (unit : second – default : 3sec) LogFile Setup Interval of Motion Event : If interval is set 60 sec, motion event will be recorded one time in 1 minute even though motion event occurred many times.

  • Page 23: Camera & Motion Setting

    3.3. Camera & Motion Setting 1) Display Options Use : If User select the check box, specified camera will be used to capture image. ID : Individual Camera ID View on PC monitor : User can see the image at the connected PC Screen. View on TV monitor : User can see the image at the connected TV Screen.
  • Page 24 4) Stamp Use : If User select the check box, stamp will be displayed at some part of a recording image . Date : If User select the check box, Date will be displayed. Position : User can choose the location of stamp (Left Top, Right Top, Left Bottom, Right Bottom) 5) Pre/Post Record : User can define the number of frames that will be recorded before and after detecting the motion...
  • Page 25 7) Alarm Beep : If motion or sensor event is occurred, the computer beeps regularly.. Interval : 1~100 sec(default : 3sec) Popup : If motion or sensor or video loss event is occurred, corresponding camera will be popup. Interval : 1~100 sec(default : 3sec) View on TV Monitor : After motion or sensor event is occurred, it will be displayed on TV monitor if user can see the image at the connected TV Screen in camera tab.

  • Page 26: Recording Setting

    Work Hour . From: The start time of working hour . To: The end time of working hour . The system will work by original camera setup for recording schedule. After Hour . The system will work by an advanced setup during the time outside the time zone established as Work Hour.
  • Page 27 l Recording Schedule example Sunday – Saturday (00:00 – 03:00) : System will record all captured image. Sunday – Saturday (04:00 – 07:00) : System will record with Sensor Mode : System will record captured image, only if any sensor event is detected. Sunday –...

  • Page 28: Display & Pan Tilt Setting

    3.5. Display & Pan Tilt Setting 1) Screen Control Options Bright : Configure the Brightness of image. Contrast : Configure the Contrast of image Saturation : Configure the Saturation of image. Hue : Configure the Hue of image. 2) Transaction Data Control If capture board supports POS function, this button to active.

  • Page 29: Sensor Setting

    3.6. Sensor Setting 1) Options Use : When User selects this check box, the selected sensor will be enabled and used. Location : User can specify the location of a sensor. 2) Flags Sensor Type : According to the sensor, define the active type (high or low). High –...

  • Page 30: Network Setting

    3.7. Network Setting 1) Use Network Connection Use : When User selects this check box, the system will allow the remote access through the network. TCP/IP Port : TCP/IP port number. (Auto set to 9871) 2) Compression Mode Choose the Mode : User can choose M-JPEG or M-MPEG. Image Quality : User can control the quality of image that will be sent to the remote site.
  • Page 31 < System setting for Modem (Dial-up) Connection > h Setting in the Server system (Windows XP) Control Panelè’Network Connections è ‘Create a new connection’ . When the ‘New Connection Wizard’ shows, please click ‘Next’. Users Guide Page 31 of 127 Printed for Reference Only on November 15, 2006...
  • Page 32 Select ‘Setup an advanced connection’ as “Network Connection Type” and click ‘Next’. Select ‘Accept incoming connections’ as “ Advanced Connection Options” and click ‘Next’. Users Guide Page 32 of 127 Printed for Reference Only on November 15, 2006...
  • Page 33 Select a correct connection device to corresponding with ‘Incoming Connections’ and click ‘Properties’ . Please check if the port speed is same as installed Modem. If yes, please return to ‘New Connection Wizard’ and click ‘Next’. Users Guide Page 33 of 127 Printed for Reference Only on November 15, 2006...
  • Page 34 Tick on the ’Do not allow virtual private connection’ and click ‘Next’. Please click ‘ Add’ to register of new user for Dial-up Networking connection. Please enter User ID & Password and click ‘ OK’ , Then new user will be created. Please tick on the new user and click ‘ Next’. Users Guide Page 34 of 127 Printed for Reference Only on November 15, 2006...
  • Page 35 Select ‘Internet Protocol(TCP/IP)’ and click ‘Properties’. Please specify TCP/IP address for remote connection. (You can allocate a proper IP address) Users Guide Page 35 of 127 Printed for Reference Only on November 15, 2006...
  • Page 36 Click ‘Finish’, then the setting is completed. If you check the window of ’Network Connections’ , you can see new connection setting as ‘Incoming Connections’. Users Guide Page 36 of 127 Printed for Reference Only on November 15, 2006...
  • Page 37 h In case no Modem connection when remote system is using Windows98 SE, please correct a connection setting as follows (don’t need setting in Windows XP) StartèProgramsèAccessoriesèCommunicationsèDial-Up Networking. When ‘Make New Connection’ is showing up, please insert computer name and select a proper Modem and click ‘Next’. Insert telephone number and click ‘Next’.
  • Page 38 Again StartèProgramsèAccessoriesèCommunicationsèDial-Up Networking. New icon for new connection was created. If you double clicking of new icon, following window is showing up. Select ‘Server Types’ and check if “ TCP/ IP” was ticked. Users Guide Page 38 of 127 Printed for Reference Only on November 15, 2006...

  • Page 39: Audio Setting

    3.8. Audio Setting In case of DIT-2400 1) Options Use : When User selects this check box, the system records the sound. (If You want use 2-Way Audio function wih RMS, You must be not check the “use” no.1 channel.) Do not save if silent : function for no recording audio at the slient 2) Select Camera Camera : User can configure an Audio to the specific camera.
  • Page 40 < Ref : Check point when Audio recording/Playback will not work normally > h Case 1 : Please check if other recording program is running in the system firstly. If other recording program is ON (running) in the system, the recording function on the DVR system will not work. h Case 2 : Please check if the path for input signal will be select as Microphone.
  • Page 41 Click [Advanced] in the window of “Sounds and Audio Devices Properties”. Select OptionsèProperties. Users Guide Page 41 of 127 Printed for Reference Only on November 15, 2006...
  • Page 42 Select ‘Recording’ and click “OK”. Tick on the box of ‘Select’ in the ‘Microphone’. (If not, audio recording would not work sometimes. If you want to playback the data with audio in the remote site, you need to take above steps in the remote PC.) Users Guide Page 42 of 127...
  • Page 43 After setting, please test if the setting is correct or not. StartèProgramèAccessoriesèEntertainmentèSound Recorder. h Note : When you playbacks the recording data including sound, please set the playback speed to 1x. Also, please check there was no tick on the “Mute all” and proper level of volume control. Users Guide Page 43 of 127 Printed for Reference Only on November 15, 2006...

  • Page 44: Notification Setting

    3.9. Notification Setting User can configure the Notification that will alert the remote site (when any motion is detected or sensor event is occurred.) 1) ADD : User can ADD a remote site with following information IP/Tel No : The IP or Telephone number of the remote site. Port : TCP/IP Port number.
  • Page 45 3) Delete : Select one of the added remote sites, and User can delete a site 4) Schedules Camera : Select a specific camera Notify : After push a button “Notify”, make a schedule draw a zone for remote notification. Eraser : Erase selected time zone.

  • Page 46: User Setting

    3.10. User Setting 1) ADD : Certified User can ADD a User with following information Access Mode : Admin - Administrator will have all accessibilities to the entire system. Users- User will have partial accessibilities to the entire system. Access Level: When user selects this user category, User can define accessibilities of a specified user.(Screen, File System, Setup, Search, Backup, Remote Control, Pan Tilt, Exit).

  • Page 47: Playback (Server Search)

    4. PLAYBACK (Server Search) To play back the recorded image, User needs to execute the Search program. User can run the Search program through clicking the PLAYBACK button at the Action Button. When User starts the Search program, this program will ask LOGON ID and password. After entering Account ID and password, click “OK”...

  • Page 48: Playback Default Screen

    4.1. PLAYBACK Default Screen : When User starts PLAYBACK program, a new PLAYBACK window will be displayed as follows; 4.1.1. Screen Mode Icons : Beside the capture image, there are 9 different display type buttons. : Single-Screen-Mode : Display the recorded image from one camera, User can select a camera from the Record Table : Multi-Screen-Mode : Display 4 recorded image from 4 different cameras : Multi-Screen-Mode : Display 9 recorded image from 9 different cameras...
  • Page 49 : Min-Screen Mode : Minimize the Window. 4.1.2. Status Information Window : This window will show the status of displayed image and captured time information. Date and Time information (Captured). Camera Information : Show the camera number. Record Mode : Show the recorded mode of displayed image. Type of Image : Show the type of captured image.
  • Page 50 4.1.4. Image Control Menu : User can control or modify the captured image. SHARP : control sharpness the captured image BLUR : control blur the captured image ZOOM : could be zoom in for specific area of the captured image B / W : could be shown black &...
  • Page 51 Above picture shows the recording data(17:10~17:12) of the No. of 1~32 cameras could be backed up into “F:\QuickBackup.exe” at now. PRINT : print out the captured image SOUND : able to adjust play back volume. SPEED : able to adjust play back speed 4.1.6.
  • Page 52 4.1.7. Record Table : When User selects a Date from the Calendar, system will show the recording information. Camera : Time Cell : show time zone for 24 hours The dark color Cell means recording with Audio data. 4.1.8. Record Table (Minutes Bar) : When User selects a Time Cell, system will show the recording information in an hour.
  • Page 53 - OK : Finish compilation of the book-mark. - Cancel : Cancel compilation of the book-mark. - Delete Item : Delete selected item. - Delete All : Delete all items. - Modification : Add note for the selected item. 4.1.11. Motion (Object) Search : You can make a setting of motion detection for the specific object from the existing recording data and make a data file for the sorted image data by the motion (object) search.
  • Page 54 1) Find Range Camera Number : Select camera number. From : Starting time. Until : Finishing time. From First : From the image data by the first time of the date. Until Last : To the image data by the last time of the date. 2) Find Setup Whole Area Mode : Motion will be detected in whole area.
  • Page 55 4.1.12. Search selected cameras only on playback If you want to search some cameras only, you can add or remove the play back camera(s) by clicking the time table of the right button of your mouse. You can also re-arrange the display screen by the mouse drawing. Catch up ch 1 and draw to ch 3, then each display position will be exchanged.

  • Page 56: Playback(Using Removable Hdd)

    5. PLAYBACK(using Removable HDD) You can play back the recording data from original hard disk of DVR server in the 3rd PC. 5.1 Export (DVR System Side) 1) Run FsUtil.exe (Start->Programs->DVR->Main->File Manager) and click “Delete” . 2) Select HDD which will be removable form the DVR System to 3 PC and click “Delete”.
  • Page 57 3) Choose “Delete Disk Information Only” from Delete Option window and click “OK”. 4) Confirm the hard disk which will be remain and used as DB(Data Base) and click “Exit”. Users Guide Page 57 of 127 Printed for Reference Only on November 15, 2006...

  • Page 58: Import (3 Rd Pc Side)

    5.2 Import (3 PC Side) 1) Install Playback program from provided CD. (CD\Playback\DISK1\setup.exe) * Note : You need to install the imported hard drive in the 3 PC firstly. Please follow up below “ Installation of imported hard drive” 2) Run FsUtil.exe. (Start->Programs->Playback-> Main->File Manager) and click “Add”. EMPTY !! 3) Select desired driver for playback from the list of “Dest Drive”...
  • Page 59 4) Please confirm the hard drive which added as DB(data base) and click “Exit” . 5) Run Search.exe (Start->Programs->Playback-> Main->Playback) and then you can search imported DB from other DVR server. Users Guide Page 59 of 127 Printed for Reference Only on November 15, 2006...
  • Page 60 < Installation of imported hard drive>. 1) Click Right Mouse Button on “My Computer”->Manage->Computer Management->Storage->Disk Management ( select). Place your mouse on the “Disk 1” as below and click right button of your mouse and choose ->Import Foreign Disks. 2) Select “Disk group” as below and click “OK”. Users Guide Page 60 of 127 Printed for Reference Only on November 15, 2006...
  • Page 61 3) After checking the disk volumes information as below and click “OK”. 4) The hard drive is added in the system. Users Guide Page 61 of 127 Printed for Reference Only on November 15, 2006...

  • Page 62: Remote Surveillance

    6. Remote Surveillance 6.1. Start Remote Program (Single Mode) To use remote service from the remote site, User should install the “DVR Remote” program. After User installed DVR Remote, User can start this program from the Windows “Desk Top”, double click the DVR Remote icon, or run the DVRHost.exe program in C:\Program Files\DVR\Remote folder.

  • Page 63: Setup Site

    6.3. Setup Site When User clicks the “Setup” button from the Connect window, the Site Information Window will be displayed as follows; 1) ADD : User can add a new Site. When User Click “ADD” button, Site Information Window will be displayed as follows;...
  • Page 64 Network : If you use dial up modem, check “Modem, ISDN” and enter “phone number, Windows user ID and password out of DVR server. 2) Add Group : When you use “Multi-Channel”, you can make a grouping for the desired server and cameras which you want to connect by remote surveillance program.

  • Page 65: Remote Navigation

    6.4. Remote Navigation 1) Action Buttons R,PLAYBACK : User can search the recorded images from Server System. When User click this R. PLAYBACK button, the PLAY BACK Window will be displayed and operate just same as Main’s PLAY BACK Menu. (Note : User can see action button of .
  • Page 66 L.PLAYBACK : User can search the recorded images from Client System. When User click this L. PLAYBACK button, the PLAY BACK Window will be displayed and operate just like as Main’s PLAY BACK Menu. DISCONNECT : To disconnect the current session. If you want to turn on or off the individual cameras, click “the Right button of the mouse”...
  • Page 67 click these buttons. : Relay Off : Relay On When user clicks this button, One channel Search program will be running. You can play-back 1ch on the viewer while you are monitoring the live display. Search Button : If you click this button, below box will be displayed.
  • Page 68 If there are no image recorded, it will be displayed this message box. 4) System Status Window : System Status Window will show the status or events of the system. Sever name : Display User connect to name of DVR server system. Transmission speed : Display transmission speed of image.

  • Page 69: Options

    : It will show Camera Information of DVR Server 6.5. Options If User click right button of mouse, on the display window, follow setting window is showing up. 1) Network : When User clicks the “Network” Menu, the Site Information Window will be displayed as follows; (refer “5.3 setup site”...
  • Page 70 2) Options : When User click the “Option” Menu, the setting window will be displayed as follows; 2-1) Remote Tab : determine viewer mode Auto startup : If User select the check box, system could be ready to receive a remote notification from server when remote system power on.
  • Page 71 Alert • Beep : Beep sound by remote notification. • Popup : Pop up one screen which is transferred from server by remote notification. • Emergency Save : When remote notification will be activate, the remote PC will back-up the transferring data automatically and the action icon will be changed to Green color If you click the action icon with green color, the remote back-up will be stop.

  • Page 72: Multi Remote Monitoring

    6.6. Multi Remote Monitoring After run Remote program, if you select Multi Channel on the screen, you can monitor max. 16 cameras which are installed at the each different server (location). Users Guide Page 72 of 127 Printed for Reference Only on November 15, 2006...
  • Page 73 Single : One remote PC able to connect with one DVR server . Multi-Channel : One remote PC able to connect max. 16 cameras (server). 1) Connection to Sever 1-1) Server connection per each camera (partitioned screen) Please select desired channel (screen) by clicking mouse and click “CONNECT”, then, a window will be showing up and you can select a target site registered.
  • Page 74 After log on, the system showing up following window and it shows the cameras status which were connected at the server. Please select desired camera No which you want to monitor at the remote site. If the connection is done, you can see image data on the No.2 screen of client. Users Guide Page 74 of 127 Printed for Reference Only on November 15, 2006...
  • Page 75 You can connect other channels as above. 1-2) Using Group table When you select “ Multi-Channel” and click “ CONNECT”, you can see following window. If you select desired group from group table and click “OK”, you can connect each grouped cameras. 2) Action Button Users Guide Page 75 of 127...
  • Page 76 R,PLAYBACK : User can Search the recorded images from SELECTED Server System. When User click this R. PLAYBACK button, the PLAY BACK Window will be displayed and operate just same as Main’s PLAY BACK Menu. (Note : User can see action button of If user click this icon during the remote search, the icon will be changed to green and the transmitting image data will be recorded at the remote PC) SETTING : User can configure selected system parameters from the Remote system.

  • Page 77: Local Playback

    6.7. Local Playback User can Search the recorded images from Remote System. When User click this L. PLAYBACK button in the “DVR Remote” program, the PLAY BACK Window will be displayed and operate just same as Main’s PLAY BACK Menu. Site : If User select Site button, following window will be shown and User can select the desired site for search of the recording data from remote system.
  • Page 78 After User select the desired site, User need to select “ ORIGIN” or “ REMOTE” ORIGIN : User can record a transmitting image from Server system through remote search. If User click this button, User can search those image data. (refer to section 5-4-1, Action Buttons---Remote Search ) REMOTE : User can record current transmitting image from Server system through Remote Viewer.

  • Page 79: Back-Up

    7. BACK-UP 7.1. Log on DVR BACK-UP program able to back-up the recording data into a various devices such as HDD, DAT, DVD, ONSTREAM, CD-RW etc. by manual or automatically. For data back-up, please run Windows keyèStartèProgramsèDVRèImage Back-up(dvBackup.exe) or, Click a button of “ BACKUP” from monitoring screen. The initial Account is “...
  • Page 80 - 1) Shows information of existing recording data of DVR server. - 2) Shows device or folder for data back-up. - 3) Shows the processing status of the Back-Up. 7.2.1. Tool Bar - 1) Exit : Discontinue of Back-up Program - 2) Start : Start button for manual back-up.

  • Page 81: Manual Back-Up

    7.3. Manual Back-Up User can back-up a specific recording data into a back-up device by “Manual Back-up”. 7.3.1. Select desired recording data for Back-up Shows exiting recording data of the DVR server User can select a desired recording data by/per camera, hour, minute (minimum data unit is minute).
  • Page 82 If the back-up is done successfully , bottom window shows a message of “Back-up exited normally with code 0”, Processing bar shows “Not working” and new folder of “BACKUP” was created. Users Guide Page 82 of 127 Printed for Reference Only on November 15, 2006...

  • Page 83: Backup To Backup.exe File

    7.4. Backup to Backup.exe file If you back-up the recording data (data size will be less than 2 GB) to Backup.exe file, you can playback the backup data in the any 3 rd PC without the Backup Viewer program. Note : If the backup data would be exceed 2 GB, it would be a problem.

  • Page 84: Quick Back-Up

    7.5. Quick Back-Up Click “Quick Backup” button from Tool bar, the quick backup setting menu will be displayed. - Select Cameras : User select No. of cameras to back-up - Start Time : User can select a desired start time of recording data. - End Time : User can select a desired end time of recording data.

  • Page 85: Auto Back-Up

    7.6. Auto Back-Up 7.6.1. Option setting Click “ Option “ button out of Tool bar and select which you want. * Note : If the Backup program is running, the program is hidden and you can see following icon on the Task bar. - Run this program when Windows starts - Allow this program to run in the background : 7.6.2.
  • Page 86 Check on the “Concurrent”. Note : If user want to setting all cameras for concurrent back up, please click a cell of “ USE”. - Lastest backup time : Shows latest back-up time of schedule back-up. - Backup start pointer of time : Starting point for next back-up. - Disable : Stop schedule back-up.
  • Page 87 7.6.3. Setting of “ Schedule Back-up’ User can back-up the whole recording data by daily or weekly by “ Schedule back-up” Note 1. If user wants to set all cameras, please click a “Day” cell. If user wants to back up the data at same time of the day for all cameras, please click a “Time”...

  • Page 88: How To Backup On Cd Or Dvd

    7.7. How to backup on CD or DVD If you want to backup data on CD-R/RW or DVD-R/DVD-RW and so on, Nero program should be installed in your system before. - Disc space : You can choose the space of the CD which you want to backup (default max 680MB) (If Disc space is 0 MB, there is no space to write.
  • Page 89 - Disc Name : Type of disc Name - Writing Speed : Select speed of writing to burn - Burn : If you want to backup on CD or DVD, click “Burn” button. - Abort : if you want to stop backup on CD or DVD, click “Abort” button. - Exit : if CD burning is ended, click “exit”...

  • Page 90: Backup Viewer

    7.8. Backup Viewer User can play back the back-up data by this Viewer. If user click button of “Viewer” , the “Backup Viewer” program could be run and showing following window for back-up viewer . Please refer to “Play Back “ for operation of “Back-Up Viewer” Browse : If User click Browse button, following window will be shown and User can select the desired directory for search of the back-up data from DVR system.

  • Page 91: Pos (Options)

    8. POS (Options) 8.1. Setting (Single Serial CR) Main Dialog Displays the Serial port configurations. - Use : Check Use option checkbox if you want to use the selected Device Name. - Transfer Device : Choose the cash register type(ex:Casio610001) - Camera : Choose the camera number to display the cash register data.

  • Page 92: Setting (Multi Serial Cr)

    8.2. Setting (Multi Serial CR) Main Dialog Displays the Serial port configurations. - Use : Check Use option checkbox if you want to use the selected Device Name. - Device : Choose the cash register type(ex:Fuijits1S) - Camera : Choose the camera number to display the cash register data. Add : Add the selected camera Delete : Delete the selected camera Can select multi camera for CR...

  • Page 93: Setting (Multi Tcp Cr)

    8.3. Setting (Multi TCP CR) Main Dialog Displays the Serial port configurations. - Use : Check Use option checkbox if you want to use the selected Device Name. - Device : Choose the cash register type(ex:Fuijits1S) - Camera : Choose the camera number to display the cash register data. Add : Add the selected camera Delete : Delete the selected camera Can select multi camera for CR...

  • Page 94: Font Setup

    8.4. Font Setup You can change the size and type of the font, if the entire embedded transaction data is not displayed on screen. Use Motion & Display è Transaction Data Control Button to change the font If displayed data on screen is still cut after you change the font size, now there is no way to display entire data except change the resolution.

  • Page 95: Action Code Setup

    8.5. Action Code Setup When user double-clicks Item of the list control, the Action Code Window will be displayed as follows. Action Code : select an action code of the transaction data for specialize Pre : set pre-recording frames when the action code is activated. Post : set post-recording frames when the action code is activated.

  • Page 96: Transaction Search

    8.6. Transaction Search These buttons are used to query transaction data. Users Guide Page 96 of 127 Printed for Reference Only on November 15, 2006...
  • Page 97 POS Button: If you want to query all transaction list of the selected day, use this button Below is the display screen when you click the POS button. Transaction List Header meaning Transaction list sequence Number Time DVR save time of the transaction Camera Number Register Cash Register Type...
  • Page 98 << : Move to the first page < : Move to the previous page > : Move to the next page >> : Move to the last page Query : Extend Search Report : Show the statistical graph Popup : Show an enlarged receipt data Font : You can change font, font size and color Refresh If you requery the transaction list, use the “Refresh”...
  • Page 99 If you want to go back to the original search program click the POS button again. POS CR Button: If you want to query all transaction list after selected video clip by time of the day, use this button. Time : 12:30:28 Users Guide Page 99 of 127 Printed for Reference Only on November 15, 2006...
  • Page 100 Time : 12:30:30 POS Button and POS CR Button is toggle button Users Guide Page 100 of 127 Printed for Reference Only on November 15, 2006...
  • Page 101 Query : If you want to extend search, click this button Below is the display screen when you click the Query button. Start Day & Time : Choose start day & time End Day & Time : Choose end day & time Camera : Choose camera number Item : Edit the Item to search Code : Choose the Action Code to search...
  • Page 102 Ex ) C: Select Camera Number : 4 Users Guide Page 102 of 127 Printed for Reference Only on November 15, 2006...
  • Page 103 Ex) D: Edit the Item : MDSE ST Users Guide Page 103 of 127 Printed for Reference Only on November 15, 2006...
  • Page 104 Ex) E: Code : Select Action Code : Tax Users Guide Page 104 of 127 Printed for Reference Only on November 15, 2006...
  • Page 105 Ex ) E: Value : Edit the value : > 0.11 Users Guide Page 105 of 127 Printed for Reference Only on November 15, 2006...
  • Page 106 F : Report : If you want to see statistical graph, click this button. Your computer has installed MS Excel program when you see this report. Users Guide Page 106 of 127 Printed for Reference Only on November 15, 2006...

  • Page 107: Dns Service

    9. DNS Service 9.1. DNS Client Setting (In DVR Main) Run DNSClient.exe in C:\Program Files \DVR\Main l General Domain name : insert the name of the domain within 32 characters Password : create your password within 16 characters E-Mail : insert E-Mail address for informing of the events. Users Guide Page 107 of 127 Printed for Reference Only on November 15, 2006...
  • Page 108 New Domain button : click to register a new domain name on the DNS Server. - If you complete the necessary information, click “ register” - If your on-line register is successful, following window is showing up. - If your domain name is already duplicated on the DNS server, following window will be showing up and you must use different new domain name.
  • Page 109 - Check Domain button : check if your domain name is registered on the DNS server or not Domain name is registered on the DNS server Domain name is not registered on the DNS server Users Guide Page 109 of 127 Printed for Reference Only on November 15, 2006...
  • Page 110 l Connection DNS Server : insert DNS server IP Port : insert Port No Time out : Waiting time for connection with server. Apply button : click “Apply button” for running @@ You must restart the System for application. Users Guide Page 110 of 127 Printed for Reference Only on November 15, 2006...

  • Page 111: Rms Setting (In Rms)

    9.2. RMS Setting (In RMS) - DNS server : insert DNS server IP (the same DVR Main) - Port : insert Port No IP Address : insert the name of your domain registered on the DNS server in DVR Main Users Guide Page 111 of 127 Printed for Reference Only on November 15, 2006...

  • Page 112: Log Viewer

    10. Log Viewer Click C:\Programs Files\DVR\Main\LogViewer.exe This program shows the event, system, login, network, pos log recorded. 10.1. Event Time : This column shows the time when the Motion/Sensor event occurs. Device : This column shows Camera No associated with the event. Event : 1) Motion : This means motion event occurred.

  • Page 113: System

    10.2. System Time : This column shows the time when the system event occurs. Event : This column shows the following messages.. DVR Viewer Program Start DVR Viewer Program Exit DVR Main Program Start DVR Main Program Exit DVR Search Program Start DVR Search Program Exit DVR Backup Program Start DVR Backup Program Exit...

  • Page 114: Login

    10.3. Login Time : This column shows the time when the system event occurs. Process Name : Program Name User Login : This column shows the ID of the login user. User Loggout : This column shows the ID of the logout user. Status : This column shows whether login or logout attempts were successful or failed.

  • Page 115: Network

    10.4. Network Time : This column shows the time when the network event occurs. Event : This column shows whether RMS is connected or disconnected. 1) RMS Connect 2) RMS Disconnect Address : This column shows the IP/Address of RMS connected. Mode : This column shows whether events are being taken in local side or remote side.

  • Page 116: Pos

    10.5. Pos Time : This column shows the time when the pos event occurs. Event : This column shows the following messages.. TranMain Start TranMain Exit OpenDatabase Success OpenDatabase Fail Device started Driver : This column shows the name of the driver to be loaded. Port : This column shows the Port no associated with Driver.

  • Page 117: Filter

    10.6. Filter 10.6.1. Event Time : Select Start time and End Time to search. Camera : Select Camera No to search. Event : Select the event to search. Information : Select the type to search. 10.6.2. System Time : Select Start time and End Time to search. Event : Select the event to search.
  • Page 118 10.6.4. Network Time : Select Start time and End Time to search. Event : Select the event to search Address : Type the IP/Address of RMS to search. Mode : Select the mode to search. Information : Select the type to search. 10.6.5.

  • Page 119: Setting

    10.7. Setting LogFile : Set to keep the log files in the storage for a set number of days. Save logfile period of 7 days Save logfile period of 15 days Save logfile period of 30 days Change Search’s user and password : Type User and Password to run Search.exe. Set to tray icon on exit : If you check this, this program is set to tray icon when you click exit button.

  • Page 120: Image Authentication

    11. Image Authentication This is a program for authentication of recorded JPG or BMP image in Search program. User can start the “Image Tool” program by clicking of StartèProgramsèDVRèTools èImage Authentication or run the ImgAuth.exe program in C:\Program Files\DVR\CommonFiles\Tools folder. 1) Click “Open”...
  • Page 121 ORIGIN : This is a original image recorded in DVR system. A. Recording Date : Recorded date in DVR System. B. Camera Number : Camera No C. Data Size : a Real image size D. Image Save Date : Saved date in Search or Backup Viewer program. E.
  • Page 122 This is a modified image. Users Guide Page 122 of 127 Printed for Reference Only on November 15, 2006...

  • Page 123: Web-Rms (For End User)

    12. Web-RMS (for End User) 12.1. Setting for Web-RMS Connection Set the system as below before using of HTTP WebRMS service. 1) Server Side From DVR server, go to start->Settings->Control Panel->Windows Firewall and set to “Off”. 2) Remote Side 2-1) Run Internet Explorer, Tools->Internet Option->Security->Custom Level (select). Users Guide Page 123 of 127 Printed for Reference Only on November 15, 2006...
  • Page 124 2-2) set “Download unsigned ActiveX controls” to Enable and click “OK”. Users Guide Page 124 of 127 Printed for Reference Only on November 15, 2006...

  • Page 125: Connect To Server

    12.2. Connect to Server 1) run Internet Explorer and insert IP server. Note. If following window is showing up, please recheck 13-1. 2-2) and try again. Users Guide Page 125 of 127 Printed for Reference Only on November 15, 2006...
  • Page 126 2) Click “CONNECT” 3) Connect ! Users Guide Page 126 of 127 Printed for Reference Only on November 15, 2006...
  • Page 127 4) If you want to connect two different server, please type “IP Address/muti.html” like (210.121.206.205/multi.html) 5) You can connect with two DVR servers . Users Guide Page 127 of 127 Printed for Reference Only on November 15, 2006...

Table of Contents