GAS SALAMANDER GRILL
Kasap Tip Dik Buzdolapları
G
INJECTOR CHANGE AND GAS SETTING
GAS VAPOR GRILL BURNER-INJECTOR CHANGE CHART
Gas
Gas
Group
G20
2
G25
G30
3
G31
Change of Burner Injector;
1.
Rip off the injector at the entrance of burner with a suitable tool.
2.
Change A injector by paying attention to the datas at chart with suitable injector.
(Image 1)
3.
Adjust the burner entrance setting (F) by loosening 'B' bolt and moving the valve to
forward-back. (Image 2)
4.
Change C injector by paying attention to the datas at chart with suitable injector.For
this it is enough to take off 'D' fitting and pull the gas pipe to down. (Image 3)
Setting of Half Flame;
1.
Remove the tap button and set by turning tap half flame screw (K) with suitable
screwdriver.(Image 4) Turn it to left for transformation from LPG to N.G,turn it right for
transformation from N.G to LPG.
2.
After this process,operate the appliance and set it not to be deflated during transition
from full flame to half flame.
PSG.3
Injector ∅
mm
1,40
1,40
30
1
50
1
37
1
50
1
PSG.4
PSG.5
Injector ∅
Injector ∅
mm
1,40
1,40
1
1
1
1
PSG.6
Injector ∅
mm
mm
1,40
1,40
1,40
1,40
1
1
1
1
1
1
1
1
9