Samsung TB14C52S/XEC Service Manual page 24

Alignments and Adjustments (Mechanical)
4-2-25 Cylinder Ass'y Removal
1. Remove the 3 Screws Œ, ˇ, ˆ.
2. Remove the Plate Cylinder A, B, C ´, ¨, Ø in
the direction of arrow.
3. Lift the Cylinder AssÕy ∏.
Note :
1. When reinstalling, push the Plate Cylinder A, B
¨, Ø in the reverse of arrow and then, tighten the
2 Screws ˇ, ˆ.
2. Take care not to touch the Cylinder AssÕy and the
tape guide post at reinstalling Plate Cylinder C´.
3. Take care not to touch the Cylinder AssÕy with
screw driver at reinstalling the Plate Cylinder C´.
ΠSCREW
´ PLATE CYLINDER C
ˇ SCREW
¨ PLATE CYLINDER B
Fig. 4-28 Cylinder Ass'y Removal
4-16
4-2-26 Belt Pulley Removal
1. Remove the Belt Pulley Œ.
Note : Take extreme care not to touch the grease on
Belt Pulley Πat assembling or reassembling.
∏ CYLINDER ASS'Y
ˆ SCREW
Ø PLATE CYLINDER A
4-2-27 Lever Head Cleaner Ass'y Removal
1. Release the Hook Œ.
2. Lift the Lever Head Cleaner AssÕy ´.
ΠBELT PULLEY
Fig. 1-29 Belt Pulley Removal
(Optional)
´ LEVER HEAD CLEANER ASS'Y
Fig. 4-30 Lever Head Cleaner Ass'y Removal
ΠHOOK
Samsung Electronics