Bluetooth Wireless Technology; Installing And Replacing The Remote Control Battery; Package Contents; Getting Started - RADIO.CUBO TS522D+ Manual

THANK YOU FOR PURCHASING THIS PRODUCT CUBO.
With FM/DAB/DAB+ Bluetooth TS522D+ you can listen to music played at FM/DAB/DAB+
frequencies: the music stored on your audio device or compatible mobile phone using Bluetooth
connectivity, and the one connected to the AUX input.
Before using the product, please read these instructions for use, in order to learn how to properly
use the device. After reading, keep the instructions in a safe place for later use.

BLUETOOTH WIRELESS TECHNOLOGY

The Bluetooth wireless technology allows you to connect compatible devices with no cable.
To establish a connection via Bluetooth wireless technology the unit and the other device do
not need to be in line of sight, but it is suffi cient that the two devices are at a maximum distance
of 10 meters from each other. The connection can be subject to interference from obstructions
such as walls or other electronic devices.
The unit is compliant with Bluetooth Specifi cation v2.1. Contact the manufacturers of the other
devices to be paired, in order to determine their compatibility with this device. There may be
restrictions on using Bluetooth technology in some countries. Contact your local authorities or
service provider.

PACKAGE CONTENTS

• The package contains:
• Radio TS522D+
• External AC Power Supply
• Remote control with battery
• Instruction Manual
• Soft case
If something is missing from your package, please contact your dealer.
30

INSTALLING AND REPLACING THE REMOTE CONTROL BATTERY

The remote control is supplied with a battery of the "CR2025" type that must be installed.
When the remote controllable distance is lower, or if it ceases to function properly, it is time to
replace the battery.
To perform this simple operation, proceed as follows:
1. Remove the battery compartment as indicated in the
instructions printed on the back of the remote control
2. In case of replacement, remove the battery, insert the
new CR2025 battery as shown in the fi gure below
(making sure that the "+" side is facing upwards)
3. Replace the battery in the slot.
CAUTION:
Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to
water, fi re, or high temperatures. Do not leave batteries in your pocket, purse, or other container
with metal objects, do not mix them with other types of batteries, and do not store them with
hazardous materials or fuels. Store in a cool, dry and ventilated place. Follow the laws and
regulations for transport and disposal.

GETTING STARTED

1. Remove the protective plastic from the battery compartment of the remote control as
shown in the fi gure.
2. Connect the supplied power adapter to the DC input on the rear panel of the radio. Connect
the other end of the power supply to an AC outlet. If you want to power the radio with the
battery, insert 6 "C" batteries inside the battery compartment on the bottom of the radio.
3. When you fi rst turn it on, the display will show "00:00"
4. Turn on the device by pressing the standby button on the main unit or on the remote
control. The radio will enter DAB mode and start scanning for stations. At the end of the
scan, the unit will automatically use the date and clock information gathered from the DAB
stations
CAUTION:
If the unit is powered by batteries (the power adapter is not connected), use the standby button
placed on the main unit.
When the radio is powered by batteries, the remote control has no function.
31