Panasonic MC-UG693 Operating Manual (English, Spanish) Operating Instructions Manual page 44

Safety Seal Tab
Bag Retention
Corner Flaps
Rabats de
rétention des
coins du sac
Lengüetas
de retención
de la bolsa
Tabs
Languettes
Lengüetas
Slots
Fentes
Ranuras
Bag Cover
Couvercle du sac
Cubierta de la bolsa
Languette de sécurité
Lengüeta de seguridad
Dust Bag
Sac à poussière
Bolsa para polvo
TO REPLACE DUST BAG
➢ ➢ Unfold the new dust bag.
➢ ➢ Fold the safety seal tab on the new
dust bag away from the opening
that fits on the bag holder.
Note: See PARTS IDENTIFICATION for
dust bag number.
➢ ➢ Insert the dust bag onto the bag
holder completely by holding the
bag collar.
➢ ➢ Place the dust bag collar into
position.
➢ ➢ Tuck the bag behind each of the
four bag retention corner flaps
shown here.
➢ ➢ Be sure the bottom and sides of the
dust bag are completely within bag
cavity prior to replacing the bag
cover.
➢ ➢ Position the bag cover so its
positioning tabs fit into the body
positioning tab slots.
➢ ➢ Close the bag cover.
➢ ➢ You will hear a distinct snap when
cover is securely closed.
➢ ➢ Check to see that the dust bag is
fully enclosed in the bag cover.
- 44 -