Rear Panel Connections - Harman Kardon fl8350 Technical Manual

Rear Panel Connections

1 2 3 4 5
IN
OUT
DIGITAL AUDIO
OUTPUT REMOTE OUTPUT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
AC INPUT
and (2) this device must accept any interference
AC 117V / 60Hz
received, including interference that may cause
20W
undesired operation.
AC Power Cord
1
Connect this plug to an AC outlet. If the outlet is switch is controlled, make certain that the switch is in the ON
position.
2 Coaxial Digital Output
Connect this jack to the coaxial digital input of an external digital-to-analog converter for direct access to the digital
signals of the FL8350. DO NOT connect this jack to the standard audio inputs of any device.
3 Remote Control Input
Connect the output of a remote infrared sensor or the remote control output of another compatible Harman Kardon
product. This will enable the remote control system to operate even when the front panel
blocked. It will also allow use of the FL8350 with optional, external control systems.
4
Remote Control Output
Connect this jack to the input of another compatible Harman Kardon remote controlled device to have the remote
sensor on the FL8350 provide signals to other products.
5
Fixed Audio Outputs
Connect these jacks to the CD audio inputs of your receiver, surround processor or preamplifier.
CAUTION
LEFT
RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK
DO NOT OPEN DO NOT OPEN
RIGHT
SHOCK HAZARD : DO NOT OPEN. SHOCK HAZARD : DO NOT OPEN.
AVIS:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
AVIS:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
SERIAL NO.
WARNING:
"TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE."
PRODUCT COMPLIES WITH DHHS
RULES 21CFR SUBCHAPTER J,
APPLICABLE AT DATE MANUFACTURED:
NRTL/C
LR46800
CSA 22.2
UL 1270
5
MODEL NO: FL8350
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, U.S.A.
MADE IN CHINA
(YCL).
Remote Sensor
21
FL8350
is