Table of Contents
Advertisement
* Important: If a remote control button does not work when pressed, press the FM/TV button on
the remote and try the button again.
POWER
ACTION
SELECT
SET
STOP
STOP
POWER
DST (Daylight Saving Time)
Unit auto adjusts clock for DST (Daylight Saving
Time.)
■ Spring (First Sunday in April)
➞
DST: ON
Sets clock ahead one hour.
■ Autumn (Last Sunday in October)
➞
DST: OFF
Turns clock back one hour.
• If your area does not observe Daylight Saving Time,
select DST : OFF (see "Clock" on pages 12 and 13).
Note to CABLE system installer:
This re mind er is pro vid ed to call the CABLE
(Cable TV) System Installers at ten tion to Article
820-40 of the NEC that pro vides guide lines for
proper grounding and, in par tic u lar, specifi es
that the cable ground shall be con nect ed to the
ground ing system of the build ing, as close to
the point of cable entry as practical.
Manual Clock Set
If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
1
SET CLOCK
DST : ON
SELE CT MONTH
SELECT :
SET
: SET
END
: ACT I ON
2
THU
Press ACTION twice to start CLOCK and
3
exit.
Reset all unit Memory Functions
When moving unit to a new location, or if a mistake
was made in the Initial Setup section.
1
Turn the unit Power
on.
2
Press and hold both PLAY and
for more than 5 seconds.
• The power will shut off.
3
Perform "Initial Setup" on page 10.
Press ACTION on
the remote to
display SET
CLOCK Menu
screen.
Press
to
select the month
and press SET to
set. In the same
manner, select
and set the date,
year, time, and
DST (Daylight
Saving Time).
on the unit
11
11
Advertisement
Table of Contents
